2025 NATIONAL 14127H

2025

NATIONAL

14127H

303930

Baru

BM-5183

Features - 29,9 t (33 USt) rating - 9,63 m - 38,72 m (31 ft 7 in - 127 ft) five-section boom - Can be equipped with a 9,15 m (30 ft) single-section jib; maximum tip height with jib is 50,00 m (164 ft) - Self-lubricating Easy Glide wear pads - Internal anti-two-block Five-section boom At 38,72 m (127 ft), the Series 1400H five-section boom is the longest in its size range. The long boom allows the operator to perform more lifts without the use of a jib, reducing setup time and improving efficiency. Overload protection All National Crane boom trucks are equipped with overload protection. A Load Moment Indicator (LMI) is standard on all Series 1400H machines. The LMI display console is weatherproof. The LCD display is visible in full or low light and displays all crane load lifting values simultaneously. Easy Glide boom wear pads Easy Glide boom wear pads reduce the conditions that cause boom chatter resulting in smoother crane operation. Outriggers Mainframe outriggers are crossframe H-style, with 7,47 m (24 ft 6 in) span, with a mid- span setting of 5,64 m (18 ft 6 in). Rear stabilizers are H-style with 5,64 m (18 ft 6 in) span. Removable ball and socket aluminum outrigger pads are included on mainframe outriggers. Best in class performance and serviceability - The stronger standard torsion box improves rigidity, reduces truck frame flex and reduces the need for counterweight - Speedy-reeve boom tip and sheave blocks simplify rigging changes by decreasing the time needed to change line reeving - Crane components painted before assembly reduce the chance of rust, improve serviceability and enhance the appearance of the crane - Internal anti-two block wiring standard on the 1400H routes the wiring through the inside of the boom eliminating the possibility of snagging the wire on obstructions - Bearings on the boom and retract cables can be greased through access holes in the boom side plates and number of internal boom parts has been reduced improving serviceability - The Series 1400H is supplied with 375° non-continuous rotation standard - Adjustable swing speed comes standard on the 1400H. A control knob located on the swing motor brake release valve can be easily adjusted to the crane operator’s swing speed preference - Radiator mounted on truck frame with electric fan is standard Included Options 31.6' - 127' (9,6 - 38,7 m) five section, full power telescopic boom 30' (9,1 m) fixed boom extension (side fold for stowing) Two and three part reeving, 15 ton (13,6 mt) capacity hook block with one sheave. Removable, rear boom carrying rack (anchors at rear of torsion box) 22' (6,7 m) Steel tread plate floor bed STANDARD MOUNTING Hot shift PTO in lieu of air shift PTO (required on automatic transmissions) Clockwise rotation pump (Automatic Transmission ) SFO mounting charge (If factory mounted and SFO is ordered) Drive line kit to remote mount pump. Rear bumper underride protection (included on mounted units) ICC Safety Kit (included on mounted units) Electronic engine throttle, remote engine throttle kit (included in mounts) Single front outrigger for 360o stability with 25 in(635 mm) of stroke, includes control valve DriverPosition: Left Hand Drive

2024

UNKNOWN

UNKNOWN

29.94 t

3.23 m