2024 EXTREME STEEL 72" EHD72 EXTREME HIGH FLOW

Mower (Pemotong)

2024

EXTREME STEEL

72" EHD72 EXTREME HIGH FLOW

Baru

The Extreme Steel 72” Extreme Heavy Duty High Flow Brush Cutter. The EHD72 is the heaviest duty brush cutter on the market. Virtually indestructible! Cuts up to 10-12" range trees. Designed for machines with 29 - 34 GPM flow rate (you do need a high flow machine for this brush cutter). And with a 1-Year Warranty from issues or defect or everything except for just the blades. This is a 3 Blade, Heavy Duty, Direct Drive Brush Cutter for machines 75+ HP. The EHD72 Brush Cutter has universal skid steer quick attach and is a direct drive cutter with 3-hardened steel blades. Our ¾” single fly wheel was specifically designed to maximize RPM spool up and allow for quick recovery and the highest efficiency in the market. These are 100% manufactured in the U.S exclusively for Extreme Steel. Comparable if not better than MTL, Blue Diamond, and Rut brush cutters- without the wait time, and with great customer service. The EHD72 Extreme Brush Cutter is perfect for clearing land, debris, brush, fence rows, and medium sized trees 8 inches and up. These work only on high flow – DO NOT USE ON STANDARD FLOW! But available with a standard-flow option. Specs: *1/4” steel deck plate with extra heavy duty push bar *Open front face design *3-1/2” drive shaft *3 hardened steel blades- 5″ x 1/2″ *Grease filled drive, with greaseable zert fittings *250 cc motor for machines with 27+ GPM *Steel runners on each side for ease of use over multiple terrains *3 blades (3/4” thick blade carrier) *The Hardened steel blades are bi-directional *3/8 push bar braces; ½” bottom skids *Removable chains *Top catch gussets with steps *Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers *Weight: 1,570 lbs These work only on high flow – DO NOT USE ON STANDARD FLOW! If your machine has both options you must run in high flow and it works excellent then. If your machine is STANDARD FLOW ONLY or 16 - 27 GPM you will need to select the Standard Flow Cutter. We sell 72 Inch Extreme Heavy Duty Standard Flow Skid Loader Brush Cutter - GPM: 16 - 27 - Weighs: 1,570 lbs. - Priced at $7,140. We also sell High Flow Upgrade kit for $550. With this optional kit our factory will make a standard cutter a High Flow machine with a 200 CC motor for just $550 more to our standard machine price. Usually 5-10 days order time. Bi-Directional operation – the ES HD Brush Cutters cut in both directions (reversible). We also have barb wire/wire wrap prevention studs on the underside of all cutters. 100% made in the U.S.! More Specifications: *Weight: 1,570 lbs. *Dimensions: 85 × 74 × 28 in. *GPM flow rate: 29 - 34 GPM *Cut capacity: Up to 8" range *Weight: 1,570 lbs. For 60-90 HP standard flow skid steers also check out our 72" Heavy Duty HD72 cutter for $6,390. Also 3 Blades, weight 1,350 lbs. and cuts up to 7-8" trees. Or for under 60 HP our 60” Standard Duty Brush Cutter with 2-Blades for $3,970 ordered In. SHIPPING: Can palletize and ship in the U.S. for $200 to $550 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.

712.14 kg