2024 PRO-HAUL 6 PIN CITY CHASSIS 20-40 COMBO

2024

PRO-HAUL

Baru

FEATURES Gooseneck frame All LED Lights Hutch 9700 series three leaf spring suspension, 22,400 LB GAWR* 5” Round 25,000 LB axle with oil bath hubs Two speed 50,000 LB lift capacity landing gear, 10 x 10 sand shoes 10 Hole Hub piloted wheels with 11R22.5 Tubeless Radial Tires 16-1/2 x 7 quick change brakes, Haldex ABS brake system* 30/30 brake chambers GVWR 65,000 LB 36” Kingpin Setting Grade 50, 12” x 19 LB/ft. I-BEAM construction Tare weight approx. 6,800 LB Slide pins lock in positions to hold 40’ or 45’ ISO container PRODUCT Feature: New Chassis designed for the 21st century Designed for repeated use in transportation of intermodal cargo containers Meets DOT, AAR, ANSI, TOFC, FMVSS, ISO, SAE and TTMA requirements in effect at the time of manufacture in USA Maximum Gross Weight: 65,000 LB • VIN Plate for Chassis: Standard US VIN Plate Tare Weight: 6,800 LB GEOMETRY Overall Length & Type: 40’9” Closed and 45’9” Extended, Gooseneck Frame Frame Bogie Type: With Fixed Tandem Bogie (2-Axle) 25,000 LB Axles Overall Frame Width: 96” over Bolster Main Frame Width: 40” Rear Height: Approximately 48” from ground to the top of the rear bolster in unladen condition King Pin Location: 30” from the rear face of the front bolster Landing Gear Location: 128” from the rear of the front bolster TIRES & WHEELS Tires: Factory Furnished Tire Manufacturer: Atlas* Tire Size: 11R22.5 Wheels: Factory Furnished Wheel Material: 8 Steel Wheel Wheel Manufacturer: Butler* Wheel Size: 8.25 x 22.5 Wheel Color: White Valve Stem & Metal Dome Cap UPPER COUPLER Pick-Up Plate: 5/16” thick pick-up plate with 2” diameter drain holes King Pin Trans-Support: 5/16” (6.4mm) thick fabricated channel king pin Trans-support King Pin: Standard (Buyers Product) King Pin* LANDING GEAR L/GEAR Shoes: 10” X 10” Sand Shoe Low Profile L/Gear Ground Clearance: Approximately 12” Ground Clearance Landing Gear: Butler 50,000LB lift/180,000LB Static with 2 Speed Gearbox* Crank Handle: Located at Driver’s Side FRAME Main Beam: 12” Deep x 19 LB/ft main beam, A572GR50 G/N Beam & Height: 5” deep fabricated H-beam having 4-5/8” standard deep tunnel with Standard 4-5/8” (120 mm) Gooseneck Height G/N or FWD Beam Spec: 1/2” thick x 4” wide top and bottom flanges and 1/4” thick web, A572GR50 Cross Member: Fabricated channel cross member with triangle gusset, A572GR50 Cross member Thickness: 3/16” L/G Support Bracket: 1/4” channel type bracket with 4” channel brace Front Gusset Spec: Front Gusset, 3/16” Triangular Rear Gusset Spec: Rear Gusset with bending rib, 3/16” thick Triangular Front Bolster Spec: 8” wide x 10” deep, open section. Tapered bolster to provide container guiding operation Front Bolster Material: 1/4” thick (A572GR50) Front Bolster Locking Device: Locking Pin Type Front Locking Spec: Locking Buffers 1103-1175 or Toca 900-905-00* • Rear Bolster Spec: 8” wide x 7-3/8” deep, 3/8” L Shape Rear Bolster Channel Material: 3/8” (A572GR50) Rear Bolster Top Plate Material: 1/2” (A572GR50) Rear Bolster Locking Device: Non-retractable twistlocks, Butler 1101-1206* License Plate Bracket Install: Standard Install Location Mudfl aps: 24” x 36” white factory furnished mudfl aps mounted on Vertical steel flange with horizontal member Rear Under Ride Bumper: Weld on Vertical steel flange with horizontal member Horizontal Member: 4” C-channel horizontal step guard Bumper Spec: Bumperless Type. Vertical flange shall be directly extended from rear bolster Extendable Frame Section: Fabricated 7.5” I-beam, 1/2”x5” Flanges A572, 1/4”Web A572 Extendable Frame Cross Members: 3/16” Cross Members 3/16” Triangular Gusset RUNNING/SUSP Axle Spacing: 49” Axle Spacing Axle ABS System: Tandem Axle with 2S1M ABS System Bogie & Axle Location: Location to be Fixed at 55” from the rear face of rear bolster Susp. Spec: Hutchens Undermount Hanger, H-9700* Spring Spec: 3 Leaf- High Arch 354-00 Axle Supplier: Butler* Axle-General Spec: Axle- Tandem (2) Axle with 2S1M Axle-Track Length: 71-1/2” Axle-Wall Thickness: 5/8” Axle Spindle: Tapered Spindle Brake Lining: 16.5” x 7” Rockwell Q Type shoes* Brake Control System: 2S/1M Haldex ABS* Air Tank: (2) 9-1/2x27 air tanks Air Line: Black Gates Nylon DOT Tubing Air Hose: Standard Hose Application Slack Adjuster: Meritor Style Auto - 5.5”, 28 Spline* Brake Chamber: TGI 30/30 Standard Stroke* Brake Chamber Stroke Length: Standard Stroke Length Brake Chamber Other Spec: Manufacturer’s Standard Components 10 Stud Hub Piloted Outboard Iron Hub with 16-1/2” x 7” cast steel brake drum Bearing Specification: Set 413 HM212011 & HM212049 Cone/Cup Set 414 HM218210 & HM218248 Cone/Cup Lubrication Spec: Shell Spirax 80w-90* Wheel Seals: Stemco* Hub Cap: Stemco metal 340-4009 oil type hub cap* Gladhands: Velvac Gladhands, Service 035042 & Emergency 035045* Gladhand Location: Located at Center of Front Bolster ELEC/AIR Harness-Chassis: Molded Truck Lite 88 Series Harness with junction box* 7-Way Connector Pollack 7-Way without Circuit Breakers Front Marker Lights: Trucklite 10275Y LED Rivet Mounted* Mid-Marker Lights: Trucklite 3050A LED Rivet Mounted/Trucklite 6050A MidTurn With TL 99152 WIDE TURN LENS* Rear Side Marker Lights: Trucklite 3050 LED Rivet Mounting* Rear Lights: (3) Trucklite 3050 LED Rivet Mounting* Rear Stop/Turn/Tail Lights: Trucklite 4050 LED Rivet Mounting* ABS Light: Trucklite 30200Y with 10728 Lamp Mounting Bracket & ABS Decal* License Light: Trucklite 15040 LED* Registration Holder: (1) Trucklite 97960* • Decals Standard: Factory Furnished Conspicuity Markings: Conspicuity Stripe per Federal Regulation PAINT Metal Preparation: Commercial Shot Blast Primer: Zinc Phosphate Epoxy Top Coat: Plural Component Acrylic Urethane Paint Color: Black, unless otherwise requested

11R22.5

Tandem

228.6 cm