2021 POTAIN HUP40-30

2021

POTAIN

HUP40-30

615654

Baru

E00060927

POTAIN SELF-ERECTING CRANE MODEL: HUP-4030 POTAIN SELF ERECTING CRANE EQUIPPED AS BELOW: TECHNICAL SPECIFICATIONS: - 8,818 LB / 4,000 KG. MAXIMUM CAPACITY - MAXIMUM RADIUS OF 131-FT (40M). - MAXIMUM LOAD: 8,818 LB. AT 43.2-FT / 4,000 KG AT 13.2M. (4 PARTS) - MAXIMUM LOAD AT 131-FT : 2,204 LB / 40M: 1,000 KG. (4 PARTS) - POWER SUPPLY: 480V (+6%-10%) -60HZ MAST & CHASSIS EQUIPMENT: - 131-FT / 40M. BI-FOLDING, OFF-SETTABLE LATTICE JIB. OFF-SETTABLE TO 10 AND 20 DEGREES. - GALVANIZED FOLDING MAST. - TELESCOPING INTEGRATED MAST WITH OPTION OF TWO WORKING HEIGHTS OF 98-FT (30M) AND 82-FT (25M) MAXIMUM HOOK HEIGHT WITH JIB SET AT 0 DEGREES. - 131-FT / 40.4M. MAXIMUM HOOK HEIGHT WITH JIB SET AT 20 DEGREES. (MAX OFFSET) - 18 HPL 10 "HIGH PERFORMANCE LIFTING" WINCH COMBINED WITH THE PERMANENT 4 FALL REEVING WITH LINE SPEEDS UP TO 213-FT / 65M. PER MINUTE; A NEW "MICRO SPEED HOISTING" FUNCTION IS ALSO EMPLOYED. - ‘3DVF5’ 3.0 HP WITH VARIABLE FREQUENCY TROLLEY MOTOR WITH LINE SPEEDS UP TO 148-FT / 45M PER MIN WITH LOADS LESS THAN 1 METRIC TON. LINE SPEEDS UP TO 135- FT. / 41M MIN ARE POSSIBLE WITH LOADS FROM 2,204 LB. ~8,818 LB. / (1000KG~4000KG). - ‘HPS 142’ "HIGH PERFORMANCE SLEWING" WITH SPEED FEEDBACK OFFERS GREATER SLEWING BEHAVIOR. A NEW "DRIVE CONTROL" FUNCTION ALLOWS FOR 3 DRIVING PROFILES TO BE SELECTED VIA THE NEW RADIO REMOTE CONTROL BY THE OPERATOR. - NEW WIRELESS REMOTE CONTROL WITH "SMART SET-UP" AND "DRIVE CONTROL" INCLUDES INDICATORS FOR RADIUS, HEIGHT, LOAD, MOMENT, AND WIND SPEED. TWO REMOTE CONTROL LONGER LIFE BATTERIES WITH BATTERY CHARGER IN CONTROL PANEL CAPABLE OF RUNNING THE REMOTE FOR A FULL DAY'S OPERATION. - WIRED AUXILIARY REMOTE CONTROL WITH 15M CABLE CAPABLE OF RUNNING THE CRANE AT THE SAME SPEEDS AS THE WIRELESS REMOTE CONTROL IF THE BATTERIES SHOULD BECOME DEFECTIVE. - (1) 1,918 LB. / 870 KG MANDATORY BALLAST BLOCK. - (15) 3,858 LB. / 1,750 KG CONCRETE BALLAST SLABS. - 14.76-FT X 14.76-FT / 4.5M X 4.5M CENTER TO CENTER OF OUTRIGGER PADS, WITH ADJUSTMENT UP TO 320 MM LEVELING POSSIBLE UP TO AN 8 DEGREE SLOPE WITH NEW SYSTEM TO ADJUST THE HEIGHT OF THE HIGH SOLE PLATES. ADJUSTMENT IS POSSIBLE TO 6 LOCKING POSITIONS OF THE SCREW JACK (250MM) PLUS 70MM OF THE SCREW. - "NEW" TOP SITE INTEGRATED ZONE INTERFERENCE SYSTEM WITH A TOTAL OF 7 ADJUSTABLE ZONES. - POWER CONTROL SYSTEM TO ADJUST THE CRANE TO THE POWER NETWORK; WHETHER IT IS A LOWER POWER GENERATOR SET OR A NETWORK WITH LIMITED POWER. INCLUDED OPTIONS: - HUP ANEMOMETER WITH WIND SPEED INDICATOR - UL / CSA KIT - CENTRAL LUBRICATION - HIGH SOLE PLATES (H=400MM) PAINT SPECIFICATIONS: - CRANE PAINTED "MANITOWOC RED" COLOR - INCLUDES SET OF (4) DICA 48” ROUND PADS AND (4) 60”X60”X3/4” STEEL PLATES