VND 1.175.155.571 ₫
Machine Location:2600 6th St. SWCedar Rapids, Iowa, USA 52404(Opens in a new tab)
Seller Information
View Seller InformationALTORFER INC
Contact:*Chase Lang ext 2210
Phone:+1 319-558-5692
Cedar Rapids, Iowa, USA 52404
General
Year
2011
Manufacturer
CATERPILLAR
Model
D6N XL
Hours
8,820
Serial Number
LJR00440
Condition
Used
Stock Number
US01105
Description
Pictures as of 10-11-24 8830 hours
Blade Type - VPat
Online Owner's Manual
Radio - AM FM Radio
ROPS - Enclosed
Ultra Low Sulfur Diesel Fuel
Mirrors
Engine Enclosures
Equipment-certification-code: NCR
AuxiliaryLighting
SeatType: Air Ride
Category Specific
Grade Control Ready
Yes
Chassis
Drawbar
Yes
Interior
A/C
Yes
GPS Ready
Yes
Powertrain
Differential Steering
Yes
Inspection Information
GENERAL CONDITION
ET Product Status Report Download
Yes
Logged / Active Codes
No
Machine Starts and is Operable
Yes
S.O.S. (All Compartments)
No
VIDS/VIMS Download Available
No
Visible Oil Leaks
No
Body
Poor
Frame
Fair
General
Poor
Body Comments
Damage and rust is present
Frame Comments
Bores on machine are bad and rusting.
General Comments
Notable amount of rust
GENERAL APPEARANCE
Cleaning Required
Yes
Battery Box
Poor
Belly Pans
Good
Cab or Canopy
Poor
Decals
Fair
Draw Bar
Good
Engine Enclosures
Poor
Fenders
Poor
Fuel Tank
Good
Grab Irons
Good
Guards
Poor
Hood
Fair
Main Frame Welds
Good
Paint
Poor
Radiator Grill
Good
Sheet Metal
Poor
Steps / Ladder
Fair
Transmission Guard
Good
Battery Box Comments
Rusted out, latch and door is rusted and doesn't work.
Cab or Canopy Comments
Rusting really bad and paint coming off, right side has been bent and door twisted.
Decals Comments
They are scratched and faded out.
Engine Enclosures Comments
Holes in left side right, side gouged, and both sides are starting to rust pretty bad.
Fenders Comments
Rusted and been hit on both sides behind the cab door.
Guards Comments
Rusting and been hit and bent on the rear fuel tank guard, missing panel on hardnose
Hood Comments
It is starting to rust.
Paint Comments
It has a lot of missing paint, it is rusting through.
Sheet Metal Comments
Good amount of damage and rusting really bad.
Steps / Ladder Comments
Missing the 2 cab steps
SAFETY ITEMS
Parking Brake Functioning
Yes
ROPS Certification Plate
Yes
Safety Decals In Place
Yes
Safety Decals Legible
Yes
Service Brakes Functioning
Yes
Back Up Alarm
Poor
Horn
Good
ROPS
Good
Seat Belt / Date
Good
Secondary Exit
Good
Back Up Alarm Comments
doesn't work.
Seat Belt / Date Comments
Feb-11
OPERATOR STATION
Air Conditioner
Good
Armrests
Good
Cab Filter / Heat Vent Louvres
Poor
Dash Console
Fair
Door Latches / Hinges / Seals
Fair
Floor Boards / Mats
Fair
Gauges
Good
Headliner
Fair
Heater / Defroster
Good
Hour Meter - GAUGES, OPERATION STATION, CONSOLE
Good
Hydraulic Controls
Good
Interior Lights
Good
Interior Plastic / Fabric
Poor
Mirrors
Good
Monitoring Display
Good
Radio
Good
Seat Cushions / Suspension / Type
Fair
Switches
Fair
Transmission Controls
Good
Windows
Good
Windshield Wipers
Fair
Cab Filter / Heat Vent Louvres Comments
Filters are plugged and compartment rusting out.
Dash Console Comments
Plastic broke behind seat and sides dirty.
Door Latches / Hinges / Seals Comments
They are worn and loose.
Floor Boards / Mats Comments
Rusting pretty good.
Headliner Comments
It is getting dirty.
Interior Plastic / Fabric Comments
Missing the right side insulation.
Seat Cushions / Suspension / Type Comments
Air, cushions coming apart.
Switches Comments
Some symbols are worn off
Windshield Wipers Comments
Sprayers don't work, left door doesn't return to park.
ENGINE
Apparent Other Engine Damage
No
Blow By
No
Fuel Leaks
No
Knocking
No
Oil Leaks
Yes
Service Needed
Yes
Water in Oil
No
Belts / Pulleys - ENGINE
Fair
Engine Oil Level / Condition
Good
Engine Supports / Mounts
Fair
Exhaust / Muffler / Stack
Poor
Fuel Injection System
Fair
Governor
Good
Intake / Air Filters
Fair
Operating Condition - ENGINE
Fair
Turbocharger / Blower
Good
Belts / Pulleys - ENGINE Comments
Needs replaced.
Engine Supports / Mounts Comments
The front mounts look like they are getting smashed out.
Exhaust / Muffler / Stack Comments
The muffler is all busted out around inlet and leaking.
Fuel Injection System Comments
The engine has vibration it seems like but operates fine daily
Intake / Air Filters Comments
They are caked over with dirt.
Operating Condition - ENGINE Comments
Has a vibration at idle and running full throttle under load. - machine does operate daily and engine functions properly
COOLING SYSTEM
Compression in Radiator
No
Coolant Leaks
No
Oil in Anti-Freeze
No
Standard Radiator
Yes
Anti-Freeze Level / Color / Condition
Good
Belts / Pulleys - COOLING SYSTEM
Fair
Coolers
Fair
Fan
Good
Fan Drive / Type
Good
Fan Shrouds / Guards
Good
Hoses / Tubes
Good
Radiator
Fair
Water Pump
Poor
Anti-Freeze Level / Color / Condition Comments
ELC
Belts / Pulleys - COOLING SYSTEM Comments
Needs replaced.
Coolers Comments
They are all plugged externally.
Radiator Comments
It is plugged externally.
Water Pump Comments
Thermostat is stuck open won't warm up, water pump is fine.
ELECTRICAL, STARTING AND CHARGING SYSTEM
Active Codes
No
Block Heater
No
Ether Aid
No
Jump Start Terminal
No
Alternator
Good
Batteries / Cables
Fair
Pre-Heater
Good
Starter
Good
Wiring
Fair
Work Lights
Fair
Batteries / Cables Comments
Covered and corroding.
Wiring Comments
It is all starting to corrode.
Work Lights Comments
Left rear light out.
TRANSMISSION
Leaks - TRANSMISSION
No
Multi Velocity Shift Program
Yes
Powershift
Yes
Case
Good
Controls - TRANSMISSION
Good
Cooler
Good
Lines / Fittings - TRANSMISSION
Fair
Operating Condition - TRANSMISSION
Fair
Pump - TRANSMISSION
Good
Seals
Good
Temp / Pressure Gauges
Good
Torque Converter (Stall Speed)
Fair
Transmission - Forward Shifts
Fair
Transmission - Reverse Shifts
Fair
Valves
Fair
Lines / Fittings - TRANSMISSION Comments
All lines and fittings are corroded, and rusting.
Operating Condition - TRANSMISSION Comments
It shifts harsh and has a vibration, maybe could use calibrated.
Torque Converter (Stall Speed) Comments
1920 rpm, 1935 rpm is spec, has good vibration at stall.
Transmission - Forward Shifts Comments
It shifts pretty rough.
Transmission - Reverse Shifts Comments
It shifts pretty rough, forward to reverse is pretty bad and harsh.
Valves Comments
It shifts very harsh.
STEERING
Differential Steer
Good
Differential Steering Controls
Good
Pump / Motor
Good
Steering Linkage
Good
Steering Operating Condition
Good
Steering Valve
Good
BRAKE
Parking Brake Operation
Good
Service Brake Operation
Fair
Holding What Gear?
2
Service Brake Operation Comments
They are very direct with little modulation.
HYDRAULICS
Leaks - HYDRAULICS
Yes
Angle Cylinder
Fair
Control Linkage - HYDRAULICS
Good
Hose Lines
Fair
Hydraulic Valves
Fair
Lift Cylinders
Fair
Mounts / Yokes
Fair
Overall Operating Condition
Fair
Pumps
Good
Tank / Sight Glass / Cap
Good
Tilt Cylinder
Fair
Angle Cylinder Comments
Not leaking but both bores will need welded and bored and all new pins and bearings.
Hose Lines Comments
They are all rusting and corroding on the ends.
Hydraulic Valves Comments
Completely covered in material and look like it might be leaking through the material, might be a line.
Lift Cylinders Comments
Not leaking but both bores will need welded and bored and all new pins and bearings.
Mounts / Yokes Comments
They are all worn out and shot, will all need welded and bored.
Overall Operating Condition Comments
It is all loose and rough.
Tilt Cylinder Comments
Not leaking but both bores will need welded and bored and all new pins and bearings.
BLADE
Back of Blade
Fair
C Frame / Mounts / Bearings
Poor
Cutting Edge & Bits
Fair
Face / Moldboard
Fair
Pins
Poor
Stabilizer Link
Fair
Tower
Poor
Trunnions
Fair
Back of Blade Comments
It has some deeper gouges and dings.
C Frame / Mounts / Bearings Comments
Bores are all bad.
Cutting Edge & Bits Comments
They are getting worn.
Face / Moldboard Comments
It is getting thin on the edges.
Pins Comments
Will need all new pins and bearing and every bore welded and bored.
Stabilizer Link Comments
Worn.
Tower Comments
Main bearing is gone and will need all new.
UNDERCARRIAGE
Pins & Bushings Turned?
No
Guiding Guard - Left
Poor
Guiding Guard - Right
Poor
Track Frame - Left
Good
Track Frame - Right
Good
Carrier Rollers
LeftMeasurement: 6.00;LeftMeasurementPercentWorn: 77;RightMeasurement: 6.00;RightMeasurementPercentWorn: 77
Frame Extension
LeftMeasurement: 1;RightMeasurement: 1
Shoe Width
LeftMeasurement: 23.6;RightMeasurement: 23.6
Track Shoes
LeftMeasurement: 2.00;LeftMeasurementPercentWorn: 60;RightMeasurement: 2.00;RightMeasurementPercentWorn: 60
Equalizer Bar
has a little movement.
Link / Brand / Part Number
has new cat links on it.
Pivot Shaft
couldn't check oil, plugs are rusted out and rounded.
Guiding Guard - Left Comments
The lower guards and mounts are all bent up and bad shape.
Guiding Guard - Right Comments
The lower guards and mounts are all bent up and bad shape.
FINAL DRIVES
Magnetic Plugs Removed & Checked?
Yes
Housings, Left
Good
Housings, Right
Fair
Planetaries / Differential, Left
Fair
Planetaries / Differential, Right
Good
Housings, Right Comments
Shavings of iron on the magnet.
Planetaries / Differential, Left Comments
Shavings of iron on the magnet.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1
Inspected 9-24-24 at 8,801 hours
comment 2
Machine is used daily and operating condition with no major failures. It has been working in Gypsum that caused rusting. Rusty machine that operates daily and working condition.
comment 3
Undercarriage is in very good condition with very little use. New Cat rails (links) and idlers installed 80 hours ago. Undercarriage very good condition and lots of life remaining.
comment 4
Machine is priced as is condition with no repairs planned or included. Machine in operating condition as is.