2024 VERMEER BC1000XL

2024

VERMEER

BC1000XL

New

Operable

Contact us today to order your Vermeer BC1000 Chipper! Complete with a 72.4-hp (54-kW) Deutz 2.9 L4 gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ engine control system and patented SmartFeed technology and has a 12-in (30.5-cm) cutting capacity. Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper. FEATURES & BENEFITS Electronic fuel injection (EFI) engine An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines. SmartFeed system Increase operator productivity while reducing strain on vital engine parts with the help of the patented SmartFeed system. This feed-sensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger, hardwood material. 3-year/3000-hour extended limited warranty Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drum, shaft and ring-fetter hubs in addition to the 1-year/1000-hour Vermeer equipment limited warranty. SPECIFICATIONSCOMPARE MODELS GENERAL DIMENSIONS AND WEIGHTS Length - Feed Table Up, Tongue In: 160 in Length - Table Down, Tongue Extended: 208 in Width: 66.5 in Height: 101 in Weight - Engine Option One: 4680 lbs Tongue Weight - Engine Option One: 520 lbs Sound Power: 119 dB(A) ENGINE Make and Model: Deutz G2.9 L4 Number of Cylinders: 4 Gross Horsepower (Maximum): 72.4 hp Torque (Max): 154 ft-lb Fuel Tank Capacity: 20 gal Max Fuel Consumption: 4 gph Fuel Type: Unleaded and E10 gasoline Air Cleaner: 2-stage dry with safety element Oil Filter: Spin-on Recommended Oil: 10W30 Oil Volume with Filter: 8 qt Maximum Angle of Continuous Operation: 30 deg Cooling Medium: Liquid cooled Coolant Capacity (Engine and Radiator): 5.5 gal Alternator: 95 amps Fan: 18.75-in suction Clutch Type: Clutchless PTO Clutch Drive Engagement: Belt tensioner FEED SYSTEM Feed Roller Orientation: Horizontal Number of Feed Rollers: 1 Feed Roller Clamp Load: 350 lbs Feed Roller Minimum Distance to Drum: 1 in Feed Roller Dimension: 20 " x 17 " (50.8 cm x 43.2 cm) Number of Knives: 2 Weight of Feed Roller: 400 lbs Number of Feed Roller Motors: 1 Motor Displacement: 28.3 Motor Manufacturer: White Feed Speed: 118 ft/min Infeed Table Width: 52 in Infeed Table Length: 32 in Infeed Hopper Height: 12 in Infeed Throat Capacity: 12 " x 17.5 " (30.5 cm x 43.2 cm) Pinch Point - Distance to End of Feed Table: 66.5 in Distance from Feed Table to Ground: 26 in Infeed Table Material Thickness: .2 in SAFETY SYSTEM Bottom Feed Stop Bar: Standard Bottom Feed Stop Bar Diameter: 2 in Bottom Feed Stop Bar Material Thickness: 11 GA Actuation Force (BFSB): 34 lbs Normal Sensitivity: 22 deg Reduced Sensitivity: 12 deg Reset Method: Green hold-to-run button Four Position Feed Control Bar: Standard Positions: 4: E-stop, forward, neutral, and reverse Actuation Force: 34 lbs Green Hold to Run Button: Standard DRUM/DISC CUTTING SYSTEM Material Capacity: 12 in Thickness: 20 in Diameter: 20 in Speed: 2220 rpm Weight With Shaft: 460 lbs Safety Lock - Number of Positions: 2 Number of Knives: 2 Knife Thickness: .6 in Material: A8 chipper steel Useable Edges: 2 Knife Size: 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) Number of Bolts/Knife: 4 Replaceable Threaded Knife Block: Yes Number of Paddles: 5 Fixture Method: Weld-on Air Flow: 580 cfm Bedknife Size: 3.5 " x 17.3 " (8.9 cm x 43.8 cm) Bedknife Thickness: 1 in Bedknife Material: 1018 Bedknife - Number of Useable Edges: 4 CUTTER DRIVE COMPONENTS - ENGINE OPTION ONE Number of Bearings: 2 Bore: 2.4 in Type: Spherical rollers Manufacturer: Linkbelt Dynamic Capacity: 31400 lbs Static Capacity: 53500 lbs Belt Idler/Tensioner: Yes Belt Type: 5V DISCHARGE SYSTEM Chute Height: 101 in Chute Rotation Angle: 270 deg Rotation Type: Manual rotate with pin lock Rotational Lock: Yes HYDRAULIC SYSTEM Tank capacity: 7 gal Recommended Oil Type: Vermeer VMF System Type: Open center Filtration Method: 10 micron return; 100 micron suction Pump Flow at Maximum RPM: 3 gpm System relief pressure: 2500 psi Flow Control: No Directional Control: Yes Oil Cooler: No ELECTRICAL SYSTEM System Voltage: 12 volt Battery: Group 24; 580 CCA Standard Gauges: Fuel and MFD Deluxe Gauges: Standard Switches: Droop, EcoIdle, and Sensitivity Controller: Vermeer ACS Display: In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. Shutdown System: High temp, low pressure Radio Remote Control: No CHASSIS Frame Description: 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) Tongue Extension: Extendable 24" (61 cm) at 12" (30.5 cm) increments Hitch Type: Pintle Fender Description: Bolt-on steel Axle/Suspension: Torsion Type - Option One: Rubber torsional Manufacturer - Option One: Dexter Capacity - Option One: 5200 lb (2358.7 kg) Tires - Option One: ST235/80/R16 Load Range E Wheels - Option One: 16 " x 6 " (40.6 cm x 15.2 cm) Axle/Suspension - Option Two: Torsion Type - Option Two: Rubber torsional Manufacturer - Option Two: Dexter Capacity - Option Two: 7000 lb (3175.2 kg) Tires - Option Two: ST235/80R16 Load Range E Wheels - Option Two: 16 " x 6 " (40.6 cm x 15.2 cm) Brake Type: Standard electric or optional hydraulic Trailer Light Type: LED OTHER OPTIONS Special Paint: Optional Extended Warranty: Optional Preventive Maintenance: Optional

94.64 L

2,265.69 kg

30.48 cm

168.91 cm

Single

Pintle

36.54 kw

DEUTZ

TD2.9L4

Diesel

USA Tier 4

381 cm

168.91 cm

256.54 cm

2,265.69 kg