2022 JOHN DEERE 1023E

2022

JOHN DEERE

1023E

Used

149041

388.4

2022 John Deere 1023E Key Features Powerful Final Tier 4-compliant diesel engine AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes Features Spend more time working and less time switching equipment with easy implement swaps Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST) Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering Comfortable and convenient open operator's station Flexibility in operation with multiple mid-mower lift system options Key Specs Engine power (gross): SAE J1995 rated power: 16 kW / 21.5 hp / 21.8 PS at 3200 rpm Power take-off (PTO) power: 11.1 kW / 14.9 hp Steering hydraulics: 13.2 L/min / 3.5 gpm Implement hydraulics: 13.2 L/min / 3.5 gpm Hitch type: Limited Category 1 Lift capacity, 24-in. behind link arms: 344 kg / 758 lb. Standard transmission; forward/reverse: Hydrostatic - two range Cruise control: No Approximate shipping weight (open-station; cab): Open station: 656 kg / 1446 lb. / Cab: Not applicable Wheelbase: 1450 mm / 57.1 in. Engine Manufacturer: Yanmar® Engine model: 3TNM74F-NCJT Engine power (gross): SAE J1995 rated power: 16 kW / 21.5 hp / 21.8 PS at 3200 rpm Power take-off (PTO) power: 11.1 kW / 14.9 hp Rated engine speed: 3200 rpm Type: Diesel Injection pump type: Indirect injection Aspiration: Natural Emissions compliance: Final Tier 4 Cylinders/displacement: Three cylinders: 0.993 L / 60.6 cu in. Number of cylinders: Three Cylinder liners: Cast-in-block Bore and stroke: 74 x 77 mm / 2.91 x 3.03 in. Compression ratio: 23.5:1 Lubrication: Pressurized Cooling system: Water pump Air cleaner: Dual element Engine torque at rated speed: 47.7 Nm / 35.2 lb.-ft Fuel tank capacity: 24 L / 6.3 U.S. gal. Electrical Battery size: 500 CCA Alternator (12-V): 40 amp Starter size: 1.2 kW / 1.6 hp Fuel System Type: Indirect injection Transmission Standard transmission; forward/reverse: Hydrostatic - two range Left-hand reverser: No Final drive: Spur gear Brakes: Wet disc (left-hand pedal) Steering: Power Axle capacity: Front / 612 kg / 1349 lb. / Rear / 715 kg / 1576 lb. Creeper: No Cruise control: No Differential lock: Yes Hydraulics Type: Open center Pump rated output: Steering / 13.2 L/min / 3.5 gpm / Implement / 13.2 L/min / 3.5 gpm / 24 L/min / 6.3 gpm Pump type: Single gear Maximum operating pressure: 138 bar / 2000 psi Draft control sensing: Select control Remote control valves available: Three 3-Point Hitch Type: Limited Category 1 Lift capacity, 24-in. behind link arms: 344 kg / 758 lb. Power Take-Off (PTO) Standard: Rear: 540 rpm / Mid: 2100 rpm Control: Independent Clutch: Wet disk Brake (for mid and rear PTO): Wet disk Fluid Capacities Crankcase with filter: 2.7 L / 2.9 qt Transmission and hydraulic system: 12.3 L / 3.2 gal. Final Drive Type: Spur gear Differential lock: Yes Operator Station Rollover protective structure: Type / Foldable / Yes Platform - flat/straddle: One-piece semi flat Gear shift location - console/floor: Left-hand side Dimensions Wheelbase: 1450 mm / 57.1 in. Front axle clearance: 195 mm / 7.7 in. Turning radius without brakes: Outside front tire: 2.51 m / 8.2 ft Limited slip differential: No Approximate shipping weight (open-station; cab): Open station: 656 kg / 1446 lb. / Cab: Not applicable Tires Front: R3 Turf: 18x8.50-10 / R4: 18x8.5-10 Rear: R3 Turf: 26x12-12 / R4: 26x12-12 Front tread range: 931 mm / 36.7 in. Rear tread spacing: 895 mm / 35.2 in.

Tracks

Singles

Singles

16.7 kw

MFWD