Call for price
Rental Prices:
Monthly: TWD $1,144,115
(Price entered as USD $35,000)
Lease Prices:
Call For Availability
Machine Location:14411 US-2Medical Lake, Washington, USA 99022(Opens in a new tab)
Seller Information
View Seller InformationMaxim Equipment
Contact:Joe Jensen
Phone:+1 209-781-4068
Ripon, California, USA 95366
Rental Contact Information
Maxim Equipment
Contact:Joe Jensen
Phone:+1 209-781-4068
Ripon, California, USA 95366
General
Year
2023
Manufacturer
IROCK
Hours
491
Model
ITC300
Serial Number
710022
Condition
Used
Stock Number
230801 CC12
Description
CRUSHING CHAMBER…
• Metso MC300 Cone Crusher
• Feed opening: 41” (1050mm)
• Crusher input speed: 750 - 950 rpm
• Crusher Drive: Direct drive
• Closed side setting adjustment: Hydraulic
• Level sensor: Ultrasonic
• Throw: 3.3” (84 mm) at discharge with new liners
• Power required: 300 Hp
FEEDER…
• Feeder opening width: 41” (1050 mm)
• Feeder drum crs.: 19’ – 8.2” (6.0 m)
• Drive: Hydraulic
• Feeder belt width: 48” (1200 mm)
• Motor: Danfoss OMSS 125
• Gearbox: Bonfig 809 W2 24.2:1
• Flow rate: 33.8 GPM (128 LPM)
• Adjustable speed: Yes
• Maximum speed: 42 rpm
HOPPER…
• Length: 12’ – 4.9” (3.78 m)
• Width: 7’ – 2” (2.2 m)
• Volume: 6.5 yd3 (5 m3) levelled off, 8.1 yd3 (6.2 m3) heaped
• Material: ¼” sides + 3/8” Hardox® liners
MAIN CONVEYOR…
• Stockpile height: 12’ – 9” (3.887 m)
• Belt width: 48” (1200 mm)
• Belt spec: Plain 500/3 8+2
• Drive drum dia.: 13.7” (350 mm)
• Tail drum dia.: 10.6” (270 mm)
• Motor: OMV800
• Flow rate: 23.7 GPM (89.6 LPM)
• Maximum speed: 112 rpm
• Angle adjustable: YES
• Quick release: YES
POWERUNIT AND HYDRAULICS
• Engine: CAT C13B TIER 4F/STAGE V
• Engine power: 536HP
• Cone drive clutch: PT-tech HPTO14TF1
• Flywheel Pump 1 (Tracks/Feeder): Kawasaki K3VL80
• Flywheel Pump 2 (Tracks/Main conveyor): Kawasaki K3VL80:
• LH PTO Pump 3 (Auxiliary/Lube/pilot): Turolla 29/29/10
• Total system flow (max): 88.5 GPM (335 LPM)
• Hydraulic tank capacity: 211 gal (800 L)·
ELECTRICS…
Emergency stops: 4 off, 2 feeder, 2 power unit
Chassis cabling: Armored cable
Start Siren: YES – 10 sec delay
Control panel: Tedd Engineering / IFM
Engine shutdowns:
· Low oil pressure
· High water temp
· Air filter blockage (selectable)
· Fuel contamination
· Low hydraulic tank level
· Low lube oil flow
· Low lube oil pressure
· High lube oil temperature
· High hydraulic oil temperature
Radio control tracks and feeder: STANDARD
Pendant track control: YES – plugged in control cabinet
TRACKS…
• Width: 15.7” (400 mm)
• Length: 13’ – 5.4” (4.1 m) crs
• Height: 32” (817 mm)
• Gearbox: Bonfiglioli 711
• Ratio: 144:1
• Motor: Rexroth A2FE90
• Speed max: 0.93 mph (1.50 kph)
• Flow rate: 40.2 GPM (152 LPM)
• Multiple speeds:Three speed system selectable at control panel with smooth start/stop
SAFETY FEATURES…
• External belt alignment points
• External grease points
• Engine safety shutdown systems
• Full safety guarding for nip points