TWD $9,774,011
Seller Information
View Seller InformationShaker Equipment Sales
Contact:Daniel Smith
Phone:+1 270-238-7018
Auburn, Kentucky, USA 42206
General
Year
2024
Manufacturer
LIUGONG
Model
936F
Hours
8
Condition
New
Hours Meter
Accurate / Verified
Description
New with Hydraulic Quick Attach, Hydraulic Thumb, Financing at 2.99% for 60 months. 3 Year / 4000 hours Full Warranty , 5 Year / 7000 hour Powertrain and Hydraulic Warranty. Hammers available
ENGINE
High-pressure common rail, electronically controlled direct injection fuel system
with 3 power modes, auto-idle and auto-shutdown features.
Emissions rating EPA Tier 4 Final/EU Stage V
Make Cummins
Model L9
Aspiration Wastegate turbocharged, EGR-free
Charged air cooling Aftercooler
Cooling fan drive Silicone oil clutch, variable speed fan
Displacement 542 in3
(8.9 L)
Gross power 314 hp (231 kW) @ 2,100 rpm
Net power 298 hp (219 kW) @ 2,100 rpm
Peak torque 1,125 lbf·ft (1,526 N·m) @1,400 rpm
Cylinders 6-cylinder, in-line, water-cooled
Bore × Stroke 4.5 in x 5.7 in (114 mm × 145 mm)
HYDRAULIC SYSTEM
Main pump, type Load-sensing variable pump
Main pump, maximum flow 2x88 gpm (2x333 L/min)
Implement Normal: 4,975 psi (34.3 MPa)
Power boost: 5,410 psi (37.3 MPa)
Auxiliary 1, one-way pressure 4,350 psi (30 MPa)
Auxiliary 1, two-way pressure 5,075 psi (35 MPa)
Auxiliary 1, maximum flow 71 gpm (270 L/min)
Auxiliary 2, two-way pressure 3,045 psi (21 MPa)
Auxiliary 2, maximum flow 13 gpm (50 L/min)
Slew circuit 4,700 psi (32.4 MPa)
Travel circuit 4,975 psi (34.3 MPa)
Pilot pump, type Gear pump
Pilot circuit 508-566 psi (3.5-3.9 MPa)
Pilot pump, maximum flow 8.3 gpm (31.5 L/min)
OPERATING WEIGHT
Operating weight, typical 85,538 lb (38,800 kg)
Operating weight, maximum 108,025 lb (49,000 kg)
SPECIFICATIONS
SERVICE CAPACITIES
Fuel tank 163.8 gal (620 L)
Engine oil 7.9 gal (30 L)
Final drive, each 2.5 gal (9.5 L)
Swing drive 2.8 gal (10.5 L)
Cooling system 9.8 gal (37 L)
Hydraulic reservoir 63.4 gal (240 L)
Hydraulic system total 118 gal (450 L)
DEF tank 17.1 gal (65 L)
UNDERCARRIAGE
Track shoe, each side 49
Link pitch 9 in (216 mm)
Shoe width, typical 24 in (600 mm)
Bottom rollers, each side 9
Top rollers, each side 2
SWING SYSTEM
Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
Swing parking brake resets within five seconds after swing controls return to neutral.
Swing speed 10 rpm
Swing torque 104,728 lbf·ft (142,000 N·m)
DRIVE & BRAKES
Steering controlled by two hand levers with pedals.
Max. travel speed High: 3.4 mph (5.5 km/h)
Low: 2.1 mph (3.4 km/h)
Gradeability 35°/70%
Max. drawbar pull 71,939 lbf (320 kN)
ELECTRIC SYSTEM
System voltage 24 V
Battery 2 x 12 V, in series
Alternator 24 V - 70 A
Starter motor 24 V - 10.7 hp (24 V - 8.0 kW)
SOUND PERFORMANCE
Interior sound level (ISO 6396) 69 dB(A)
Exterior sound level (ISO 6395) 105 dB(A)
WORKING RANGES
Description Short Arm Long Arm
Boom 21 ft 0 in (6,400 mm)
Arm options 8 ft 6 in (2,600 mm) 9 ft 6 in (2,900 mm)
A Max. digging reach 34 ft 8 in (10,560 mm) 35 ft 2 in (10,728 mm)
B Max. digging reach at ground level 33 ft 11 in (10,350 mm) 34 ft 6 in (10,527 mm)
C Max. digging depth 22 ft 1 in (6,730 mm) 22 ft 7 in (6,890 mm)
D Max. digging depth 8 ft (2.4m) level 21 ft 5 in (6,530 mm) 22 ft 0 in (6,710 mm)
E Max. vertical wall digging depth 14 ft 6 in (4,430 mm) 16 ft 8 in (5,085 mm)
F Max. digging height 32 ft 3 in (9,818 mm) 32 ft 3 in (9,830 mm)
G Max. dumping height 22 ft 8 in (6,900 mm) 21 ft 10 in (6,655 mm)
H Min. swing radius 14 ft 5 in (4,385 mm) 14 ft 8 in (4,465 mm)
Arm digging force (ISO)
Normal 54,630 (243 kN) 51,030 lbf (227 kN)
Power Boost 59,410 lbf (264 kN) 55,500 lbf (247 kN)
Bucket digging force (ISO)
Normal 65,195 lbf (290 kN)
Power Boost 70,900 lbf (315 kN)
Bucket capacity * 2.4 yd3 (1.8 m3)
Bucket tip radius * 5 ft 10 in (1,785 mm)
Bucket width * 61 in (1,540 mm)
* Factory standard
DIMENSIONS
Description Short Arm Long Arm
Boom 21 ft 0 in (6,400 mm)
Arm options 8 ft 6 in (2,600 mm) 9 ft 6 in (2,900 mm)
A Shipping length 37 ft 1 in (11,300 mm)
B Shipping height top of boom 12 ft 6 in (3,800 mm)
C Undercarriage width, with 24 in (600 mm) shoes 10 ft 6 in (3,190 mm)
D Shipping length on ground 26 ft 3 in (7,993 mm) 25 ft 4 in (7,733 mm)
E Track gauge 8 ft 6 in (2,590 mm)
F Length to center of rollers 13 ft 7 in (4,140 mm)
G Track length 16 ft 8 in (5,075 mm)
H Overall width of upper structure 10 ft 6 in (3,190 mm)
J Overall width including handrail 10 ft 9 in (3,265 mm)
K Overall width including cab rearview mirror 11 ft 5 in (3,490 mm)
L Tail swing radius 11 ft 9 in (3,593 mm)
N Counterweight ground clearance 4 ft 1 in (1,250 mm)
P Overall height of counterweight 8 ft 7 in (2,616 mm)
Q Overall height of cab 10 ft 5 in (3,188 mm)
R Overall height of platform handrail 11 ft 1 in (3,366 mm)
S Minimum ground clearance 21 in (545 mm)
T Track shoe width
24 in (600 mm)
28 in (700 mm)
32 in (800 mm)
36 in (900 mm)
Category Specific
Operating Weight
38,782.15 kg
Auxiliary Hydraulics
Yes
High Pressure Hydraulics
Yes
Coupler
Yes
Quick Attach
Yes
Thumb
Yes
Thumb Type
Hydraulic
Exterior
ROPS
Enclosed
Interior
A/C
Yes
A/C Condition
New
Heater
Yes
Engine
Horsepower
234.15 kw
Engine Manufacturer
Cummins