TWD $11,533,469
Seller Information
View Seller Information
General
Year
2019
Manufacturer
CATERPILLAR
Model
980M
Hours
7,740
Condition
Used
Idle Hours
3125
Stock Number
L4593
Description
ECM IDLE HOURS: 3125, LOAD FACTOR: 14%, CAT C13 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Joystick Steering, Ride Control, Aggregate Arrangement, CAT Payload System, Autodig Function, Bridgestone VSNT L4 29.5R25 Tires, NEW L5 Tire Option Available, CAT 7.75 CYD GP Bucket, CAT 7.5 CYD Spade Nose Bucket Available, Rear View Camera, Axle Oil Coolers, Joystick Bucket Control, Powered Heated Rear View Mirror, Remote Door Opener, Halogen Flood Light Arrangement, Rated at 425 HP, Weight 67,000 LBS.
Repair/Condition Report:
The following are repairs completed by the CAT dealer prior to Marcel Equipment owning the machine;
At 792 hours, installed NEW seat air compressor
At 891 hours, performed 500 hour service
At 1,976 hours, performed 2,000 hour service
At 2,494 hours, performed 500 hour service
At 2,903 hours, performed 3,000 hour service
At 3,378 hours, performed 500 hour service
At 3,985 hours, performed 2,000 hour service
At 4,412 hours, performed 500 hour service
At 4,861 hours, performed 5,000 hour service
At 5,429 hours, performed 500 hour service
The following was completed by Marcel Equipment;
Upon arrival to our yard machine was stripped for power washing
Machine was inspected visually & operationally
Engine oil filter was cut open - clean
Transmission filter was cut open - clean
Hydraulic filter was cut open - clean
Axle oils were checked - levels good & oils clean
The following pressures were taken to ensure within OEM spec;
Engine oil
Fuel
Engine boost
Full stall & double stall
Transmission main
Torque convertor inlet & outlet
Transmission lube
Transmission lock-up
Steering
Main hydraulic
Pilot
Brake cut-in & cut-out
Brake accumulator
Ride control accumulator
Fan min & max speeds
The following repairs were completed by Marcel Equipment;
Line bored front & rear steering cylinder mounting bores
Installed NEW pins & bearings on steering cylinders
Cleaned & inspected HVAC system & installed NEW filters
Installed NEW hydraulic tank vent filter
Inspected cab & all switch functions
REBUILT seat assembly
Repaired window washers & installed NEW wipers
Completed miscellaneous minor repairs on machine
This unit is ready to go to work.
Exterior
ROPS
Enclosed
Powertrain
Horsepower
316.92 kw