2017 CATERPILLAR D6N WH

2017

CATERPILLAR

D6N WH

8,899

Used

1955

D2971

CAT C7.1 ACERT Engine, Powershift/Autoshift Transmission, Cab (ROPS) with A/C, Differential Steer, 6 Way PAT Blade with Trash Rack, All NEW CAT SALT Undercarriage, 33" Trapezoidal Shoes, Flood Lighting Arrangement, Air Turbine Engine Pre-Cleaner, Factory Waste Handling (Landfill) Arrangement, Rear Protection Screen, Rear Striker Bar Box Assembly, Final Drive Seal Guards, Reversing Fan - Flexaire, Ansul Fire Suppression, Heavy Duty Rad Guards, Heavy Duty Bottom Pans, Fuel Tank Guard, Rated at 182 HP, Weight 45,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 264 hours, 250 hour service completed At 525 hours, 500 hour service completed At 793 hours, 750 hour service completed At 1,098 hours, 1,000 hour service completed At 1,281 hours, 1,250 hour service completed At 1,556 hours, 1,500 hour service completed At 1,899 hours, 1,750 hour service completed At 2,210 hours, 2,000 hour service completed At 2,429 hours, 250 hour service completed At 3,370 hours, 250 hour service completed At 3,698 hours, 500 hour service completed At 4,868 hours, installed NEW a/c compressor & dryer At 5,067 hours, 250 hour service completed At 5,525 hours, 250 hour service completed At 5,535 hours, REBUILT final drives At 5,759 hours, 500 hour service completed At 5,993 hours, 750 hour service completed At 6,257 hours, installed NEW track chains, rollers & sprockets At 6,288 hours, 2,000 hour service completed At 6,541 hours, 250 hour service completed At 6,851 hours, 500 hour service completed At 6,936 hours, installed NEW a/c condenser fan At 6,936 hours, installed NEW turbo charger At 7,080 hours, 750 hour service completed At 7,346 hours, 1,000 hour service completed At 7,350 hours, installed NEW Flexaire fan At 7,764 hours, 1,250 hour service completed  At 8,129 hours, installed NEW clean emissions module Marcel Equipment completed the following inspections; Upon arrival, machine was fully stripped for power washing Full visual & operational inspections were completed Engine, torque, transmission & hydraulic pressures were taken to ensure within OEM spec Performance checks were completed Oils were checked for contaminates Magnets & suction screens were checked for contaminates All filters were cut open & inspected for contaminates Machine was serviced as required Engine, transmission & hydraulic oils were changed Final drive oils were change Marcel Equipment then completed the following repairs; Installed all NEW CAT undercarriage  Resealed both blade lift cylinders & installed NEW pins & bearings Final drives were disassembled, inspected & resealed Resealed both angle cylinders & installed NEW pins & bearings Resealed angle cylinder & installed NEW pins & bearings Line bored blade bores as required REBUILT equalizer bar & installed NEW pins & bushings Line bored track frame bores Installed NEW batteries Serviced battery connections Installed NEW rear wiper motor Installed NEW fan blades & resealed hub Installed NEW engine belt & tensioner Installed NEW cab heater hoses Removed hardnose & installed NEW pins & bushings Installed NEW pivot shaft bearings & resealed Installed all NEW hydraulic lines for blade cylinders  Installed all NEW powertrain lines  Installed NEW cab fan blower motor Serviced & cleaned complete HVAC system Installed NEW a/c accumulator, dryer & compressor Completed all required cab repairs Completed all required cosmetic repairs Machine is now scheduled to be sandblasted & painted.

20,411.66 kg

Enclosed

135.72 kw