TWD $31,092,564
Machine Location:4796 Rice Lake RoadDuluth, Minnesota, USA 55803(Opens in a new tab)
Seller Information
View Seller InformationGENERAL EQUIPMENT & SUPPLIES INC
Contact:Kris Akervik
Phone:+1 218-409-8565
Fargo, North Dakota, USA 58103
General
Year
2022
Manufacturer
SUPERIOR
Model
P500
Serial Number
PC35322
Condition
Used
Stock Number
E00062540
Description
NEW FABTEC/SUPERIOR PORTABLE PATRIOT P500 CONE PLANT WITH 60" REAR DISCHARGE CONVEYOR, EQUIPPED AS DESCRIBED BELOW:
P500 SUPERIOR CONE CRUSHER:
STANDARD FEATURES:
- WEIGHT APPROX. 75,000 LBS, BARE CONE
- ONE PIECE CAST STEEL MAIN FRAME ASSEMBLY, AR STEEL LINERS, 4340
FORGED STEEL SHAFT, AND CAST ARM GUARDS
- INSPECTION PORTS (2) MAIN FRAME INSPECTION PORTS
- CAST STEEL ADJUSTMENT RING AND CLAMPING RING WITH INTERNAL
THREADS, (9) CLAMPING CYLINDERS, (4) INDEXING PINS, ADJUSTMENT MOTOR MOUNT,
(3) VIBRATION SENSORS DETECT ADJUSTMENT RING MOVEMENT WITH VANTAGE™ AUTOMATION
- ADJUSTMENT ASSEMBLY WITH FORGED STEEL DRIVE RING, DRIVE RING SUPPORTS WITH
MOLDED URETHANE WEAR PADS, PLANETARY DRIVE UNIT WITH PINION, HYDRAULIC DRIVE
MOTOR [SPRING APPLIED BRAKE], (2) BOWL ADJUSTMENT SENSORS WITH VANTAGE™
AUTOMATION
- CAST STEEL BOWL ASSEMBLY WITH EXTERNAL THREADS, WITH THREADED RETENTION
HARDWARE, FITTED WITH MANGANESE STEEL LINER
- CAST STEEL HEAD ASSEMBLY WITH FORGED STEEL HEAD BALL, ONE PIECE BRONZE UPPER
AND LOWER BUSHINGS, MOLDED URETHANE T-SEAL, MANGANESE STEEL MANTLE
- LINER CONFIGURATION STANDARD MEDIUM LINERS INSTALLED - 18% MAGNANESE LINER
- ECCENTRIC CAST DUCTILE IRON WITH BRONZE BUSHING
- COUNTERWEIGHT CAST STEEL WITH POURED LEAD WEIGHT, AR STEEL COUNTERWEIGHT
GUARD, FORGED STEEL SPIRAL BEVEL GEAR, MOLDED URETHANE U-SEALS
- SOCKET ASSEMBLY FORGED STEEL SOCKET WITH BRONZE LINER
- COUNTERSHAFT BOX WITH BRONZE BUSHINGS, FORGED STEEL COUNTERSHAFT AND SPIRAL
BEVEL PINION GEAR
- TRAMP RELEASE (6) HYDRAULIC CYLINDERS, HANGING CYLINDER DESIGN REDUCES MAIN
FRAME STRESS, RELIEF VALVE FOR TRAMP PRESSURE RELIEF, DUAL GAS CHARGED BLADDER
ACCUMULATORS
HYDRAULIC POWER UNIT ASSEMBLY:
- POWER UNIT FABRICATED STEEL 75 GALLON TANK, SKID TYPE MOUNTING FRAME, MOUNTED
MOTOR, GEAR TYPE PUMP, SOLENOID CONTROL VALVES, FILTER WITH REPLACEABLE
CARTRIDGE, BLADDER CLAMPING CYLINDER ACCUMULATOR, REMOVABLE COVER TO PROTECT
POWER UNIT
- BASIC STANDALONE SYSTEM WITH OPERATOR CONTROL BOX: INCLUDES MAIN
ADJUSTMENT AND PRESSURE MONITORING
PACKAGE LUBE ASSEMBLY:
- LUBE TANK SKID MOUNTED 175-GALLON CAPACITY, HINGED TOP COVER TO VIEW RETURN
OIL LINE, (2) 6KW LUBE TANK HEATER, SIGHT GAUGE AND LOW OIL LEVEL SWITCH
- OIL PUMP GEAR TYPE, 75 GPM FLOW, 20 MICRON FILTER, REPLACEABLE CARTRIDGE,
FILTER BYPASS RELIEF VALVE, (2) PRESSURE DIFFERENTIAL SWITCHES FOR A DIRTY
FILTER WARNING AND BYPASS ALARM
- AIR COOLER AIR TYPE LUBE SYSTEM OIL COOLER AND RELIEF VALVE
- SENSORS RELAY SWITCH SENSORS, CRUSHER DRAIN LINE TEMPERATURE READOUT, SUPPLY
OIL TEMPERATURE READOUT, LUBE TANK TEMPERATURE READOUT, ALL LUBE UNIT SENSORS
AND SWITCHES WIRED TO MOUNTED TERMINAL BOX
ADDITIONAL SPECIFICATIONS:
- COLD WEATHER KIT COLD WEATHER KIT INCLUDING ADDITIONAL RELAYS FOR PUMPS AND
HEATERS, AND ADDITIONAL TANK HEATER
- AUTOMATION VANTAGE™ AUTOMATION WITH 150' TETHER
- COUNTERSHAFT BLOWER CREATES A POSITIVE PRESSURE INSIDE COUNTERSHAFT BOX TO
PREVENT MATERIAL CONTAMINATION
CONE DRIVE:
- QTY. (1) 500 HP 1800 RPM TEFC MOTOR
- COGGED BELT DRIVE BY FABTEC, 1100 COUNTERSHAFT SPEED
- JACK SHAFT DRIVE FOR NO SIDE LOADING OF PINION
- CONE IS RAN AT 900 RPM
HEAVY DUTY CONE MOUNT AND AR LINED UNDER CONE DISCHARGE HOPPER WITH 1/2" X 6"
ADJUSTABLE WIPERS.
CONE FEED RING WITH EXPANDED METAL WINDOWS.
WALKWAYS AROUND CONE WITH DIAMOND PLATE FLOOR, TOE BOARDS, AND 42" TUBESTEEL
HANDRAILS EXTENDED TO FRONT OF MOTORS.
60" OVER REAR AXLE UNDER CONE CONVEYOR, 20 HP TEFC:
- 5207 FALK SHAFT MOUNT REDUCER ON ALLOY SHAFT.
- VULCANIZED LAGGED HEAD PULLEY, SELF-CLEANING WING TAIL PULLEY.
- 3 PLY BELTING WITH 1/4" COVER.
- DODGE SCM BEARINGS.
- CLOSE SETTING ON CEMA C IDLERS UNDER CONE, THEN 36" SPACING
- VULCANIZE SPLICE 60" BELT
- 60" SUPERIOR X-TERRA BELT SCRAPER
3 AXLE CARRIER 24" WF 76# BEAMS:
- 9700 HUTCH SUSPENSION, 10' SPAN.
- 10' WIDE, 22,500# AXLES AND 11:00RX22.5 TIRES.
- AIR BRAKES, LIGHTS, REFLECTIVE TAPE, MARKER LIGHTS, AND MUD FLAPS.
- FOUR GROUND SUPPORT STANDS WITH JACKING LEGS.
- QTY. (2) TOOL BOXES PROVIDED, (1) FOR CRUSHER TOOLS, (1) FOR VANTAGE
AUTOMATION SYSTEM
SAFETY GUARDS, SANDBLASTED CHASSIS, RUST INHIBITOR PRIMER, AND TWO FINISH COATS
OF PAINT INCLUDED.
- TRAIL KING TKAB2 BOOSTER CONNECTION/HYD BOOSTER FOR CUSTOMER SUPPLIED
BOOSTER, 9FT. BOOSTER NOT INCLUDED.
- SELF SUPPORTING OVERSIZED HEX STYLE FEED RING WITH OVERFLOW CHUTE
FAB TEC PLANT MOUNTED 70K RUN-ON SYSTEM:
- SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY .HYDRAULIC HONDA UNIT.
- (6) 5" X 24" CYLINDERS 48,000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT.
- HEAVY DUTY FOOT PADS
OBSERVATION STAND INCORPORATED INTO WALK-IN DRIVE GUARD:
- FOR EASY CONE DRIVE MAINTENANCE AND CONE FEED OBSERVATION.
PLATFORM IN FRONT OF CHASSIS WITH HANDRAILS:
- DIAMOND PLATE DECK.
- FULL LENGTH FORMED 3/16" SKIRTBOARD TO HEAD PULLEY:
- RUBBER DISC RETURNS
SPECIAL JACK SHAFT DRIVE FOR SINGLE 500 HP MOTOR:
- DODGE PX200 ELASTOMERIC COUPLING.
- (2) 3 15/16 TYPE 'E' BEARINGS.
- 3 15/16" ALLOY SHAFT.
- ADDED STEEL FOR LOWER BEARING/ SHEAVE MOUNT.
- ADDED GUARDING.
- OBSERVATION DECK INCORPORATED INTO GUARDING.
HINGED UNDER CONE CONVEYOR FOR MAINTENANCE:
- HYDRAULIC RAISE AND LOWER OF UNDER CONE CONVEYOR
- REMA AB 50 FLASHING
- SINGLE POINT GREASE STATION FOR UNDER CONE CONVEYOR
- EXTRA PANEL STYLE GUARDING AROUND UNDER CONE CONVEYOR TAIL PULLEY SECTION
- LED LIGHTS AND STROBE LIGHTS.
ELECTRICAL SWITCHGEAR FOR P500RD CONE PLANT EQUIPPED AS PER BELOW:
- 60X60 NEMA 3R/4 ENCLOSURE AND COMPONENT PANEL
- CUSTOM CORD CAGE AND LEG KIT, SETS OFF PLANT FOR OPERATION
- REINFORCED LIFTING EYES
- MANAUALLY OPERATED SAFETY START UP SIGNAL HORN
- ILLUMINATED EMERGENCY STOP PANIC BUTTON STYLE
- 100FT REMOTE PENDANT. 100FT VANTAGE PENDANT.
500 HP CONE:
- ABB PSTB REDUCED VOLTAGE SOFT STARTER
- INTEGRATED TO VANTAGE CONTROL SYSTEM
- WINDOW KIT FOR SAFE VIEWING OF MOTOR AMPS AND STARTER CODES
- 15 HP HYDRAULIC PUMP - NO CONTROL BUTTONS, CONTROLLED BY VANTAGE
SYSTEM
- 30 HP CONE FEED CONVEYOR 100 AMP RECEPTACLE
INTERLOCKED TO:
- 20 HP RD CONE DISCHARGE CONVEYOR - VIA MOTOR STARTER INTERLOCK
- CONE LUBRICATION - VIA VANTAGE CONTROL, CONE UP TO SPEED - VIA VANTAGE
CONTROL
- 3 HP CONE LUBE PUMP - NO BUTTONS - VANTAGE CONTROLLED - 20 AMP
RECEPTACLE
- 1 HP CONE LUBE COOLING FAN - NO BUTTONS – VANTAGE CONTROLLED
10 KVA AUXILLIARY TRANSFORMER:
- INSTALLED TO CORD CAGE
- (2) 120 VAC, 20 AMP WEATHERPROOF GFCI RECEPTACLES
24 PIN PHOENIX CONNECTOR TO PROVIDE QUICK CONNECT/DISCONNECT OF KCS CONTROL
SYSTEM
- 5 HP VFD WITH LINE REACTOR FOR FUTURE BAG HOUSE
- 150FT PARALLEL SINGLE CONDUCTOR POWER CORDS
FABTEC DESIGNED MAINTENANCE ACCESS PLATFORM WITH RAILINGS AND WALKWAYS.
BAG HOUSE STAND FOR UNDER CONE CONVEYOR:
-BAG HOUSE NOT INCLUDED.
-BLANKING PLATE FOR FUTURE INSTALL OF BAGHOUSE
EXTRA WALKWAYS TO EXTEND ON EACH SIDE OF BAG HOUSE
FULL LENGTH BOLT-ON DUST COVER ON TOP OF SKIRT BOARD OVER CONVEYOR
UNDER CONE CONVEYOR DISCHARGE HOOD WITH FOG NOZZLE SPRAY BAR, INCLUDES MANIFOLD WITH GATE VALVE.
GUARDING: IT IS THE RESPONSIBILITY OF THE END USER TO VERIFY AND PROVIDE PROPER
GUARDING AND ELECTRICAL INSPECTION ON ALL EQUIPMENT PRIOR TO STARTUP AND TO
REQUEST MSHA/OSHA INSPECTION. ALL EQUIPMENT COMES WITH BASIC OEM GUARDING
(UNLESS OTHERIWISE SPECIFIED) THAT MAY NOT MEET THE END USER'S SPECIFIC
REQUIREMENTS, NOR THOSE OF LOCAL MSHA OR LOCAL OSHA INSPECTORS.