NOT SPECIFIED NOT SPECIFIED

05952089

Used

Offshore CT Unit Type: Used Location: North America Notes: • Class 1 Div 2 Zone 2 $1,296,000 • Class 1 Div 2 DV $1,188,000 Offshore CT Unit Details CT CONSOLE • Hydra Rig Offshore console • Dimensions: 17ft long x 8ft 6in wide x 9ft 3in tall • Weight (approximately): 15,000 lbs. • Rear entry cabin with large cabin. • Injector control and BOP control hose reels mounted in front of console • Unit will be blasted and painted and refurbed with new hoses and recertified gauges • Unit frame will be full load tested and followed by MPI inspection of critical welds and padeyes • Unit will be painted to customer’s paint specification CT POWER UNIT • Engine: Remanufactured Detroit Series 60 engine with 0 Hrs. since rebuild. 665 hp Tier Three electronic engine package • New radiator and Charge air cooler • 6in Exhaust system to be wrapped with 1in thick insolation. Turbo and spark arresting muffler • Five 10 gallon rebuilt accumulator bottles • One 2.5 gallon accumulator for priority reserve. • 200 gallon hydraulic tank, 200 gallon fuel tank • Two Coponcoated hydraulic coolers • Dimensions: 11ft 6in long x 8ft 6in wide x 9ft 3in tall • Weight: 15,000 lbs. • 12vDC starter and electrical system.(Air starter can be installed) • 30 gallon air reservoir with air compressor mounted on engine and air dryer • Unit frame will be full load tested and followed by MPI inspection of critical welds and pad eyes • 120 GPM @ 5000 psi closed loop injector pump • 90 GPM @ 3000 psi system pump • Dual cooling vane pumps • 12vDC transfer pump for fuel or hydraulic oil • Unit will have all new hoses installed • Unit will be blasted and painted to customer’s paint specification. CT Injector • Hydra Rig 680 injector • Maximum pull 80,000 lbs. • Maximum snub 40,000 lbs. • Gearboxes, brakes and motors have been torn down and inspected • Filters changes and chains have been inspected. • Currently dressed with 2in inserts CT PACKOFF • Texas Oil Tools 4.06in 10 k side door stripper • 4.06in 10k lower flange • Swivel mounted between injector adapter box and pack-off for easy centering • Unit will be torn down inspected and new seals installed CT REEL • S&S reel • Completely rebuilt • Will be painted to customer’s paint specification • Full load tested and MPI of unit and spreader bar assembly • 15k reel swivel that has been inspected and rebuilt with new seal kit • Chain driven by gear box, brake, and motor assembly • Will hold 27,00 feet of 1.75in coiled tubing.