THB ฿1,870,359
Seller Information
View Seller Information
General
Year
2020
Manufacturer
YANMAR
Model
V8
Hours
1,308
Serial Number
YCG00V80C00500591
Condition
Used
Description
Financing & shipping available.
860_681_3610
SPECIFICATIONS
ELECTRICAL SYSTEM
Nominal voltage 12 V
Battery 12 V / 100 Ah
Generator 14 V / 95 A
Starter 12 V / 3.5 hp (2.6 kW)
Cold-starting aid Glow plugs
Lighting system in compliance with US/ISO standards, H7 headlamps.
STEERING
Articulated, 1 steering cylinder with final positioning damping on both sides, fully hydraulic
through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80 deg.
LOADER FRAME
Loader installation featuring true parallel linkage and hydraulic quick coupler
General-purpose bucket (SAE J 742) 1.05 yd3
(0.80 m3
)
Lift capacity at ground level (SAE J 732) 10,800 lbs (48,000 N)
Breakout force at bucket edge (SAE J 732) 10,328 lbs (45,900 N)
FORK LIFT ATTACHMENT
Operating load (SAE J 1197) over the total lift and steering range 2,945 lbs (1,335* kg)
Operating load in transport position, above ground level, total steering range 5,512 lbs (2,500* kg)
Width of fork carrier 4' 1" (1,240 mm)
Length fork tines 4" x 1.8" (100 mm x 45 mm) 3' 6" (1,100 mm)
Stability factor 1.25
Load center from fork attachment point 22" (560 mm)
OPERATING DATA, STANDARD EQUIPMENT
Operating weight (SAE J 1197) 10,802 lbs (4,900 kg)
Tipping load, straight at full reach (ISO 14397-1) 8,311 lbs (3,770 kg)
Tipping load, articulated at full reach (ISO 14397-1) 7,341 lbs (3,330 kg)
Total length, bucket on ground 16' 6" (5,060 mm)
Total width 6' 1" (1,850 mm)
Turning radius at outside bucket edge 13' 8" (4,160 mm)
Wheelbase 6' 9" (2,100 mm) 81
Total height (top of cab) 8' 7" (2,640 mm)
POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving
automatics, automatic optimisation and adjustment of drawbar pull and speed.
Hydraulic motor power shift providing two speed ranges. Infinitely variable speed
control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan
shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.
4 speeds:
Standard version 0 mph – 12.4 mph
S version 0 mph – 22.4 mph
AXLES
Rigid front axle with 35% limited slip differential. Oscillating rear axle with 35% limited
slip differential. Center-mounted disc brake.
BRAKES
Service brake: Hydraulically actuated center-mounted disc brake,
acting on all 4 wheels via 4-wheel drive
Auxiliary brake: Hydrostatic drive provides dynamic braking
Parking brake: Mechanically actuated center-mounted disc brake on front axle
FLUID CAPACITIES
Fuel tank 20 gal (75 l)
Hydraulic system (incl. tank) 15 gal (55 l)
TIRES
Standard 405/70 R 18 SPT 9 Dunlop
HYDRAULIC SYSTEM
Max. pump capacity 17 gpm (65 l/min)
Max. working pressure 3,634 psi (250 bar)
Control unit: Proportional hydraulic valve with 3 control circuits, supplying work functions “Lift/Lower”, “Dump/Tilt-back with high-speed control” and “3rd control circuit (1st
additional control circuit)”. Simultaneous, independent control of all movements.
Hydraulic cylinders: 1 lifting cylinder, 1 tilt cylinder, all dual-action
The thermostatically controlled oil circuit ensures that the oil temperature is promptly
reached and avoids overheating. Return filter installed in hydraulic tank allows for
eco-friendly replacement of filter elements.
Fingertip control for 3rd control circuit, electro-proportional, oil flow limitation via machine
function display, continuous operation. Installation on loader frame incl. couplings.
Hydraulically switchable float position by overdriving the pressure point “Lower” on
the joystick, electrically switchable continuous operation function.
Single, four-way control lever (joystick) with integrated direction-of-travel switch and
switch for additional control circuit.
ENGINE
Manufacturer, model YANMAR 4TNV98C
Type Diesel engine with intercooler, exhaust-gas optimised,
EPA Tier 4 Final / EC stage 5
Combustion 4-stroke cycle, Common Rail injection
Number of cylinders 4 in line
Displacement 3.3 Liter
Net power rating at 2,200 rpm (SAE J 1349) 62 hp (46.2 kW)
Max. torque 173 lb ft (235 Nm) @ 1,430 rpm
Cooling system
Attachments
Bucket
Yes
Category Specific
Operating Weight
4,899.7 kg
Tipping Load
3,769.81 kg
Auxiliary Hydraulics
Yes
Chassis
Articulating
Yes
Exterior
ROPS
Enclosed
Fenders
Yes
Exterior Lights
Halogen
Interior
Operator Controls
Joystick
A/C Condition
Good
Heater
Yes
Powertrain
Horsepower
46.23 kw
Drive
4WD
Number of Speeds
2
Max Travel Speed
36.05 km/h