THB ฿4,275,581
Machine Location:3245 Mulford RdMulberry, Florida, USA 33860(Opens in a new tab)
Seller Information
View Seller InformationUCM Inc.
Contact:Jamie Wurthmann
Phone:+1 863-328-7041
MULBERRY, Florida, USA 33860
General
Year
2010
Manufacturer
MCCLOSKEY
Hours
12,845
Model
S1302DT
Condition
Used
Hours Meter
Accurate / Verified
Stock Number
705
Description
14X5 HEAVY DUTY HIGH ENERGY 2 BEARING SCREENBOX, CAT 3054 DIT (TIER II), 100 HP, 2200 RPM, TRACK DRIVEN, INTEGRATED HYDRAULIC FOLDING STOCKPILING CONVEYORS, REMOTE CONTROL TIPPING GRID, DIMENSIONS AND WEIGHTS - LENGTH - TRANSPORT 15.09M (49' - 6"), WIDTH - TRANSPORT 2.90M (9' - 6"), HEIGHT - TRANSPORT 2 DECK TRACK 3.40M (11' - 2"), HEIGHT - TRANSPORT 2 DECK WHEEL 3.68M (12' - 1"), WEIGHT - 2 DECK TRACK 27,200 KGS (59,965 LBS), CAPACITIES - DIESEL TANK CAPACITY 399 L (105 US GAL), HYDRAULIC TANK CAPACITY 630 L (166 US GAL), CAPACITY - 12FT HOPPER 8.01 M3 (10.48 YD3), FEED CONVEYOR - BELT WIDTH 1200MM (48”), BELT SPEC PLAIN 500/3 6+3, DRIVE DRUM DIA. 335MM (13.1"), TAIL DRUM DIA. 320MM (12.5"), GEARBOX BONFIG 805 W2, GEARBOX RATIO 24.2, GEARBOX TORQUE 7000NM CONT, 12500NM MAX, MOTOR DANFOSS OMSS160, FLOW RATE 50.6 LPM (13.4 US GPM), ADJUSTABLE SPEED, MAXIMUM SPEED 13.1 RPM, MAIN CONVEYOR - BELT WIDTH 1050MM (42"), BELT SPEC PLAIN 400/3 6+1.5, DRIVE DRUM DIA. 285MM (11.2"), TAIL DRUM DIA. 270MM (10.6"), MOTOR DANFOSS OMV630, FLOW RATE 72.6 LPM (19.2 US GPM), ADJUSTABLE SPEED, MAXIMUM SPEED 115.2 RPM, TAIL CONVEYOR - STOCKPILE HEIGHT - TRACK MODEL 3871MM (12' - 8"), STOCKPILE HEIGHT - WHEEL MODEL 4139MM (13' - 7"), BELT WIDTH 1200MM (48"), BELT SPEC PLAIN - 400/2 6+1.5, DRIVE DRUM DIA. 285MM (11.2"), TAIL DRUM DIA. 270MM (10.6"), MOTOR DANFOSS OMV630, FLOW RATE 72.6 LPM (19.2 US GPM), MAXIMUM SPEED 115.2 RPM, SIDE CONVEYOR - STOCKPILE HEIGHT - TRACK MODEL 4600MM (15' - 1"), BELT WIDTH 650MM (26"), BELT SPEC CHEVRON - 400/3 6+1.5, DRIVE DRUM DIA. 285MM (11.2"), TAIL DRUM DIA. 270MM (10.6"), MOTOR OMT400, FLOW RATE 50.6 LPM (13.4 US GPM), ADJUSTABLE SPEED, MAXIMUM SPEED 126.5 RPM, SCREENBOX - DIMENSIONS - TOP DECK 4270MM X 1524MM (14' X 5'), DIMENSIONS - BOTTOM DECK 3660MM X 1524MM (12' X 5'), BEARING TYPE 2 DECK NSK/RHP 22319 - 95MM BORE, SCREENS - TOP DECK 5' X 4' SIDE TENSION - 3 OFF & 5’ X 2’ SIDE TENSION - 1 OFF, SCREENS - BOTTOM DECK 5' X 6' END TENSION - 2 OFF, TENSIONING - TOP DECK QUICK RELEASE PIN AND WEDGE, TENSIONING - BOTTOM DECK CURVED TENSION BAR AND ADJUSTER, SCREEN ANGLE 25 TO 38 DEG, SCREEN MOTOR DBH MCC2208 (58.9CC/REV), DRIVE SYSTEM DIRECT DRIVE WITH HRC180 COUPLING, HYDRAULIC FLOWRATE 72.6 LPM (19.2 US GPM), SPEED ADJUSTABLE, PRESSURE COMPENSATED FCV, SCREEN STROKE ADJUSTABLE 6 - 10MM MAXIMUM, SCREEN SHAFT SPEED 1130 - 950 RPM, SCREEN 'G' FORCE 4.29 - 5.05, HYDRAULICS - FLYWHEEL PUMP 1 DBH 5033,5033, LH PTO PUMP 2 DBH 5023,5023, RH PTO PUMP 3 DBH 2SPA11, TOTAL SYSTEM FLOW 289 L (76.3 US GPM), HYDRAULIC TANK RATIO 2.18 : 1, HYDRAULIC OIL COOLER, ELECTRICS - EMERGENCY STOPS 6 OFF, 1 FEEDER, 2 POWERUNIT RH&LH, 2 CHASSIS FRONT RH&LH, 1 WALKWAY CHASSIS, CABLING ARMORED CABLE, START SIREN - 10 SEC DELAY, ENGINE SHUTDOWNS - LOW OIL PRESSURE, HIGH WATER TEMP, AIR FILTER BLOCKAGE (SELECTABLE), FUEL CONTAMINATION, LOW HYDRAULIC TANK LEVEL, REMOTE TIPPING GRID - 2 FUNCTION TIMED, TRACKS - WIDTH 500MM (19.7"), LENGTH 2920MM (9' - 7") CRS, HEIGHT 739MM (29.4"), GEARBOX BONFIGLIOLI 707 RATIO 122:1, MOTOR REXROTH 63, SPEED MAX 1.32 KPH (0.82 MPH), FLOW RATE 72.6 LPM (19.2 US GPM), DUAL SPEED TBC, ATTACHMENT TO CHASSIS BOLT ON FOR QUICK CHANGE.
Powertrain
Horsepower
74.57 kw
Engine
Engine Overhaul
Yes
Hours Since Overhaul
1000
Shipping Dimensions
Shipping Height
340.36 cm
Shipping Length
1,508.76 cm
Shipping Weight
27,199.67 kg
Shipping Width
289.56 cm