THB ฿42,013,560
Machine Location:226 County RdParadise, Texas, USA 76073(Opens in a new tab)
Seller Information
View Seller InformationGeneral
Year
2023
Manufacturer
MASABA
Hours
0
Model
C120
Serial Number
2023266
Condition
New
Stock Number
10039
Description
PORTABLE C120 JAW PLANT -
• Quad Axle Chassis - constructed of Heavy Duty wide flange beam
• Heavy Duty 25,000lb Leaf Spring Suspension - with (16) 11R x 22.5 tires
• Brake Package – air brakes, emergency valve and plumbing
• Light Package – brake and directional signals
• Tandem Axle Booster Hitch – included, Booster NOT included
• VGF Module – VGF, hopper and support structure with skid frame, removed for travel
• VGF Hopper - constructed of 1/2” mild steel w/ ¾” Bolt in AR liners, Bolt In liners to have Countersunk Fasteners
• VGF Motor - 50hp 1800 RPM 32426T Frame & pivoting motor base
• VGF Motor Sheave, Bushing & V-Belts – Supplied by Customer
• Grizzly Bypass Chute – Constructed of ½” AR.
o Hydraulic sliding for access to Jaw die fastening hardware
• VGF Side Guards – rubber curtains on both sides of feeder in loading areas
• Qty. (2) Bulkheads – constructed of 1/4" mild steel
• Crusher Motor – 200hp 1200rpm
• Crusher Motor Sheave, Bushing & V-Belts
• Crusher Drive & Flywheel Guarding – Supplied by Customer
• 48” Under Crusher Conveyor – kingpin end discharge. With Dodge TAII#4, WEG 20hp, PPI CEMA C idlers, impact idlers, 3-ply 1/4" x 1/16” belt with vulcanized splice, Flexco EZP1 belt cleaner and full length flashing up to magnet w/ rock shelf with weld in AR liners
• Masaba Impact Bed - under crusher
• Walkway & Ladder - Upper and lower platforms with diamond plate flooring, handrail, knee rail and kickplate. Fabricated access ladder to upper platform and (2) fabricated access ladders to lower platform. Upper platform supports to frame, not supported off the crusher
• Cribbing Jacks – Qty. (2) flip down stiff legs with bottle jacks at kingpin end of chassis
• (6) Cribbing Legs – with Mounting Plate for Jacks option
• Aluminum Toolbox – with lockable, hinged lid. To eliminate wood crates for road transport
• Guards – Tail pulley guard, v-belt guard and nip guard on head pulley. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector
• Steel Shot Blasted
• Primer – (1) coat of 2 part urethane primer
• Paint – (1) coat of 2 part urethane paint
• Owner’s Manual – (1) copies in English for maintenance and parts
OPTIONS Included
• Hydraulic Lifting Jacks & Power Unit – Qty. (6) Brute Jack Run On Hydraulic
Jacks with 13hp electric start gas power unit with reservoir & filter, valve
body and plumbing. Gas Power unit with lockable cage
• Crusher Motor Sheave, Bushings, & Belts
• Bunting Magnet – P/N: PCB1009-EL
• Magnet Support Structure W/ Travel Brackets & SS Chute
• Crusher Motor – 200hp 1200rpm
• Switchgear – NEMA 4R enclosure w/ Telemecanique soft-start with a shorting
contactor, branch breaker and lockout for a 200hp motor. VFD drive, branch breaker
and lockout for a 40 hp motor. (2) extra #2 starters for off plant conveyors. Main
breaker with a handle through the door. Control transformer with fusing. 100ft main
lead cord and panel mount included. Includes console with lead cord for placement
on crusher platform with main panel on the ground.
• Access door to side of Chute – door on both sides in case of plugged chute
• King Pin Support – support structure with bottle Jack & travel location
•
(1) 52” WIDE X 20' LONG, Vibrating Grizzly Feeder
Est. Shipping Wt. 17,315 lbs. Throw/Speed 0.50 @ 810 RPM
Installation Angle 0 Motor Size 40 HP
• Complete V-Belt Drive Assemblies, suitable for required 1800 RPM T-Frame, High Torque
• V-belt drive guard included
• Includes HR Pivot Motor Base & Drive Guard
• Fixed bracket mounting assemblies, with Steel Coil Springs for 0 Degree Angle
• Feed end coil springs mounted under feeder fame or side frame mounted // Discharge end coil springs mounted at the side of feeder frame.
• Lean Back springs located under feeder fame
• 14’ pan with replaceable ¾” AR steel liners
• ½” Ar steel side liners
• Set up for (one) 6’ long cast manganese grizzly section with openings set at 3”
• VL-11 Vibrator Mechanism’s, dual shaft Mechanism assembly is complete with (4) 110mm spherical roller bearings, Oil Bath Lubrication
• Standard Metso beige color paint
• One (1) Thumb drive and one (1) Hard Copy of the operation and maintenance manuals in English
• C120 Specification
• Product configuration
•
•
•
• General
• Configurable product C120
• Delivery project type Standard
• Final destination country USA
•
•
• Main Unit
• Frequency 60 HZ
• Main voltage 460V
• Cavity Quarry
• Multiple liners profiles are available for C Series jaw crusher to fit the crusher in any application
•
• Good in abrasive and/ or blasted rock
• Flat tooth profile maximizes lifetime (more surface area to crush with)
• More wearable Mn-steel than in standard jaws
• Higher stresses and power requirements
• Less space for fines to pass through (fines removal from feed material is important)
• Increase in slabby product
•
• Jaw die configuration Single piece jaw dies
•
• Faster jaw die replacement - less downtime
• Fewer parts - center wedges not required
• Easy to install - suitable for limited maintenance space, mobile applications
•
• Jaw die fixing hardware Conventional
• Setting adjustment Hydraulic
• C Series jaw crushers are offered with multiple different setting adjustment methods depending on the application and customer need
• Crusher closed side setting is adjusted with hydraulically operated wedges by moving the wedges in or out with hydraulic cylinders. Provides stepless setting adjustment. Quick, easy and safe. Preferred especially in case crusher setting is adjusted often due to need of wear compensation or for any other reason.
•
• Ambient temperature Normal
• Support brackets Standard
• C120 utilizes the damper design shown in the picture 2.Vulcanized rubber between two rigid steel plates makes it possible to carry both horizontal and vertical loads with single component. This design makes the crusher run smoothly and absorbs momentary force spikes.
•
• Protection plate for pitman Included
• The pitman protection plate is additional protection for the crusher's pitman
•
• Protection plate - front frame Included
• The front frame protection plate for additional protection for the crusher's front frame
•
• Tools, maintenance and service Lifting tools for cheek plates
Lifting tools for jaw dies
Lifting tools for toggle plate
Tool kit
• All Nordberg C Series jaw crushers are delivered with safe to use tools for service and maintenance
•
•
•
• Drive Equipment
• Drive side Left
•
• Groove type 8V
• Motor base Integral w/o support bearings
• The integral motor support is easy to assemble, maintain and service. It decreases installation space requirements as well as costs and increases V-belt lifetime. It rests in the back of the main frame and is attached to the crusher by means of bolts.
• Motor base carries the electric motor. When motor base without support bearings is selected, the drive belt pulley is installed directly to the motor’s shaft. Without support bearings there is less maintenance points such as no flexible coupling or support bearings. Motor needs to be equipped with appropriate shaft thickness and roller bearing in drive end side to endure radial loads and to prevent motor shaft bending.
•
•
•
• Motor
• Motor supplier Customer
• Metso has a selection of optimal electric motors for C Series jaw crushers
• Crusher supplied without the motor. Customer needs to source the motor them selves. Motor information needs to be given to Metso for adjustment of motor support and/or support bearing.
•
• Motor power 150 KW
• Motor speed 1,200 PMI
• Motor shaft diameter 85 MM
• Motor shaft height 315 mm
• Motor shaft diameter (Inch) 3.375 IN
• Motor shaft height (Inch) 12.5 IN
•
•
• Optional Equipment
• Drillings for temp. sensor Included
• In total 4 drillings for temperature sensors. On the pitman (2 pcs.) and crusher frame bearing housings (1 / each).
• Feed chute Heavy duty
• The steel fabricated feed chute is bolted onto the crusher. The feed chute acts as an interface between the feeder and the crusher and ensures smooth material flow into the crusher cavity. It also protects the pitman head as well as the side plates.
• Heavy duty feed chute is tall and allows feeding with for example an apron feeder.
•
• Belt protection plate Included
• The belt protection plate is used especially in recycling applications to protect the discharge conveyor belt from long iron bars and/or rods. The use of a deflector plate however is not limited to recycling applications only. It is always mounted on the fixed jaw die side.
•
• Stroke Standard
• Different stroke modes are available for ultimate application flexibility.
• Standard long stroke for any normal quarry or mining application.
•
• Jaw maintenance platform Included
• Lightweight, adjustable and easy to handle maintenance platforms for making the jaw liner and cheek plate changes easier and safer.
•
•
•
• Finishing
• Color Metso beige
• Surface finishing is according Metso's D1.1-BG standard. This specifies that the finishing shall be one coat painted with nominal dry film thickness of 90um. The coating shall be done with polyurethane paint.
• Safety labels ANSI
• Transportation mode Built complete
• There are several crusher delivery options.
•
• Additional packages Belt protection plate separ.
Jaw maintenance platf. Separa.
Feed chute separately
Wooden box for loose items
•
•
• Documentation
• Lang. for electronic manual English
• Quantity of printed manuals 2
• Lang. for 1st printed manual English
• Lang. for 2nd printed manual English
• Electronic spare part book Included
• Quantity of spare part books 2
• Lang. for 1st spare part book English
• Lang. for 2nd spare part book English
• Manuals MM0428946 Platform manual
D100018334-EN Instruct. Manual
• Installation documents MM1607543 GA drawing
N11505040 Installation
MM0557009 Support brackets
• Feed chute documents MM1600875 Feed chute HD
• Transportation drawing MM1444821 Power unit
MM1608077 Built complete
MM1608156 HD funnel
• Hydraulic power unit drawings MM1299749 Layout drawing
MM1299851 Hydraulic diagram
MM1299750 Hydraulic power unit
• Electrification drawings MM0283219 Button box (w/o IC)
MM0457777 Electrification
MM0457778 Electric center
MM0457779 Circuit diagram
• Cavity drawings MM0383588 Quarry 1P