ASTEC PIONEER 3055

ASTEC

PIONEER 3055

0

40269

New

Accurate / Verified

40832

PORTABLE PLANT

NOTE: OPTIONAL FRAME-MOUNTED TRUCK DUMP HOPPER AVAILABLE ITEM 1 PIONEER 5260 SINGLE ROTOR HORIZONTAL SHAFT IMPACTOR INCLUDING THE FOLLOWING: CRUSHER HOUSING ASSEMBLY - welded steel plate with abrasion resistant liners, side inspection doors and hydraulic activated rear access door. PRIMARY AND SECONDARY APRONS – fabricated with replaceable wear liners and hydraulic adjustment with HMI panel for adjustment control. LESS POWER PACK. (NOTE: Lower apron will be set at 1 1/2” and the upper apron will be set at 3” unless otherwise noted.) ROTOR - removable blow bars, shaft with spherical roller bearings and rotor sheave. 3 bar MPR PAINT - Two part urethane primer, two part urethane topcoat – Factory standard color(s). NOTE - Set up for standard drive arrangement of left hand side when looking with flow of material unless otherwise noted. V-belt drive (includes motor sheave and banded v-belts, standard drive arrangement of left hand side when looking with flow of material Safety type v-belt guard Hydraulic power pack for crusher lid and apron adjust; includes 2 HP, 460V/60 Hz motor, pump, hydraulic valve and plumbing, less starter and wiring ITEM 2 PIONEER VIBRATING FEEDER 50" X 20' HORIZONTAL TYPE TO INCLUDE: Vibrator Mechanism - with two shafts, bearings, timing gears, and driven sheave 5’ Adjustable and Replaceable Grizzly Bar Section Suspension Springs. Cups and Brackets Separate "pivoted-type" Motor Mount Less Support Frame - Less Drive - Less Hopper- Less Power Paint - Two part urethane primer, two part urethane topcoat – Factory standard color(s). Pan Deck Liners - 3/4" ITEM 3 (ABOVE TO BE MOUNTED ON) Portable HSI 5260 Primary Plant: • Chassis: - Main Frame: Heavy Duty I-beam construction. - Suspension: Quad axle suspension. - Tires: Sixteen 11.00 X 22.5 tires mounted on 10 hole Budd wheels. - Brakes: Air brakes on all axles. - Cribbing: Six cribbing supports. - Highway travel items: mud flaps and tail lights • Feeder Module: - Feeder Hopper: 5/8” plate construction with 5/8”x8”x8” angle - Feeder Support: Heavy duty W8x#31 I-beam construction. - By-pass Chute: 3/8” plate construction. • Feeder Drive: - Motor: WEG 40HP 1800-RPM 440V 60Hz 286T TEFC. - V-belt Drive: Motor sheave, v-belts and drive guard • Crusher Area: - Undercrusher Hopper: 3/8” & 1/2” plate construction. - Lower Platform: access to the crusher drive area. - Platforms Access: ladders. • Crusher Drive: - Motor: 400HP 1200-RPM 440V 60Hz TEFC - Motor Base: Fabricated with ratchet type take-ups. - V-belt Drive: Motor sheave, v-belts and drive guards • 48”x37’ Front Delivery Conveyor: - Drive: Class II head end. - Gear Reducer: Dodge TAII Shaft Mount. - Backstop: Included. - Motor: 20HP 1800-RPM 440V 60Hz 254T TEFC. - V-belt Drive: Dodge with drive guard - Belt Speed: 350 fpm - Drive Pulley: Heavy-Duty 14” diameter, 3/8” herringbone lagged drum. - Tail Pulley: Heavy-Duty 12” diameter, wing type pulley. - Shafts: 1045 turned and polished. - Bearings: Dodge SCM Pillow Block. - Take-ups: Telescopic Screw type. - Belting: 3-ply 3/16” x 1/16 #330 PIW. - Belt splice: Flexco. - Idlers: CEMA B5” dia. 20 Deg sealed for life ball bearings. - Impact Slide: Included - Return: return idlers on 10’ spacing. - Belt Cleaner: Martin Pit Viper belt cleaner with tensioner. • Additional Specifications: - Paint: 1 coat primer, 1 coat finish enamel painted Astec Colors. • Run-On Hydraulic Jacks: - Six (06) 6”bore x 36” Stroke (24” effective) run-on hydraulic jacks complete. - 2.7 gpm. Gas powered unit with 11 gal reservoir. - Six bank manual valve fully plumbed with hoses and fitting. Optional Switchgear Portable HSI 5260 Primary Plant Electrical Panel: • Electrical Panel with cable located 20’ from crusher ladder – hard wired, no QDs o 72” tall x 60” wide panel o 800AMP Main Breaker o 400HP Soft Start Crusher Motor o 40HP VFD drive on Feeder. o 20HP Conveyor o 5HP Hydraulic Power Unit o Capability of adding no flow / speed sensor to conveyor to ensure interlock with Feeder. Switch by others. o Cable – 20” off

453.59 TPH (tonnes)

298.28 kw