PHP ₱8,808,093
Seller Information
View Seller InformationDeWitt Equipment
Contact:Matt DeWitt
Phone:+1 888-504-4589
Gilford, Ontario, Canada L0L 1R0
General
Year
2021
Manufacturer
CATERPILLAR
Model
315 GC
Hours
1,500
Serial Number
FTY00294
Condition
Used
Description
Excellent Cat 315 GC
Auxilliary Hydraulics
Cat Coupler
Rear View Camera
Keyless Start
Heated Seat
Excavating Bucket (some damage to floor)
Paint and tinware very good
All lights and gauges functioning
SPECIFICATIONS
ENGINE
Net Power - ISO 9249 98 hp
Engine Model Cat C3.6
Engine Power - ISO 14396:2002 100 hp
Engine Power - ISO 14396 (DIN) 101 hp (metric)
Net Power - ISO 9249 (DIN) 100 hp (metric)
Bore 4 in
Stroke 5 in
Displacement 220 in³
Biodiesel Capability Up to B20¹
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
HYDRAULIC SYSTEM
Main System - Maximum Flow 247 L/min (65 gal/min)
Maximum Pressure - Equipment 5075 psi
Maximum Pressure - Travel 5075 psi
Maximum Pressure - Swing 3770 psi
SWING MECHANISM
Swing Speed 11.5 r/min
Maximum Swing Torque 25815 ft·lbf
WEIGHTS
Operating Weight 34000 lb
SERVICE REFILL CAPACITIES
Fuel Tank Capacity 49.4 gal (US)
Cooling System 4 gal (US)
Engine Oil 2.1 gal (US)
Final Drive - Each 0.8 gal (US)
Hydraulic System - Including Tank 22.5 gal (US)
Hydraulic Tank 19 gal (US)
DIMENSIONS
Boom Reach 4.65 m (15'3")
Stick Reach R3 m (9'10")
Bucket GD 0.53 m³ (0.69 yd³)
Shipping Height - Top of Cab 9.2 ft
Handrail Height 9.4 ft
Shipping Length 24.6 ft
Shipping Length - with Blade 26.5 ft
Tail Swing Radius 5.1 ft
Counterweight Clearance 2.9 ft
Ground Clearance 1.4 ft
Track Length 12.3 ft
Length to Center of Rollers 10 ft
Track Gauge 6.5 ft
Transport Width 8.8 ft
WORKING RANGES & FORCES
Maximum Digging Depth 19.6 ft
Boom Reach 4.65 m (15'3")
Stick Reach R3 m (9'10")
Bucket GD 0.53 m³ (0.69 yd³)
Maximum Reach at Ground Level 28.5 ft
Maximum Cutting Height 31.7 ft
Maximum Loading Height 23.6 ft
Minimum Loading Height 6.8 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 19.1 ft
Maximum Vertical Wall Digging Depth 17 ft
Minimum Working Equipment Radius 7.3 ft
Bucket Digging Force - ISO 22180 lbf
Stick Digging Force - ISO 13330 lbf
AIR CONDITIONING SYSTEM
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
Attachments
Number of Buckets
1
Category Specific
Auxiliary Hydraulics
Yes
High Pressure Hydraulics
Yes
Coupler
Yes
Quick Attach
Yes
Tail Swing Configuration
Zero
Cold Weather Package
Yes
Telematics
Yes
Chassis
Long Undercarriage
Yes
Undercarriage % Remaining
90
Track Type
Steel
Bolt-On Pads
Steel
Counterweight
Yes
Exterior
ROPS
Enclosed
Exterior Lighting
LED
Interior
A/C
Yes
A/C Condition
Excellent
Heater
Yes
Keyless Start
Yes
Heated Seat
Yes
Powertrain
Pattern Changer
Yes
Engine
Engine Tier
USA Tier 4 Final