PHP ₱70,339,193
Machine Location:4300 Main AveFargo, North Dakota, USA 58103(Opens in a new tab)
Seller Information
View Seller InformationGENERAL EQUIPMENT & SUPPLIES INC
Contact:Sales Department
Phone:+1 701-213-4058
Fargo, North Dakota, USA 58103
General
Year
2023
Manufacturer
FAB TEC INC
Model
7203
Serial Number
PT-7-20-3-588-23
Condition
New
Stock Number
E00067295
Description
FABTEC PORTABLE TWIN 7' X 20' 3-DECK SUPERIOR 7203 MEDIUM SCALPER SCREENS SCREENING PLANT WITH OVERHEAD FEED CONVEYOR, 5-PACK, EQUIPPED WITH:
(2) 7' X 20' - 3 DECK SUPERIOR MEDIUM SCALPER SCREENS:
- 50 HP 1200 RPM TEFC SCREEN MOTOR.
- HUCK BOLTED SCREEN BOX.
- ADJUSTABLE OVAL STROKE ANGLE, STROKE LENGTH AND SPEED.
- SELF-ALIGNING SPHERICAL BEARINGS.
- SPLASH TYPE LUBRICATION SYSTEM.
- COIL SPRINGS
- (1) LH AND (1) RH DRIVE
- BOTH SCREENS 2.6 DEGREES
- BOTH SCREENS END TENSIONED BOTTOM DECKS
- 4' CLAMP BARS
(1) INDIVIDUAL 48" X 13'6” CROSS CONVEYOR ON 1ST DECK, (4) 30" X 13'6” CROSS
CONVEYORS FOR 2ND AND 3RD DECKS, 7.5 HP (RIGHT ANGLE DRIVE):
- VULCANIZED LAGGED HEAD PULLEYS, SELF-CLEANING WING TAIL PULLEYS.
- DODGE SCM BEARINGS.
- 7.5HP SEW RIGHT ANGLE DRIVES.
- 24" SPACING ON CEMA B4 CHANNEL INSET 20 DEGREE IDLERS FOR 30"
CONVEYORS.
- TOP CROSS CONVEYOR BUILT WITH CANOE LINERS FLASHING ~VS~ STANDARD FLASHING.
- (6) EXTRA C5-20CIT-48SB CEMA C5 RUBBER IMPACT IDLERS FOR 48" TOP CONVEYOR.
- FULL LENGTH FORMED SKIRT BOARDS.
- MOUNTED ON SLIDER FRAMES WITH HOLD-DOWNS AND CAN BE REVERSED.
- 3-PLY ¼ COVER BELT FOR 30" CONVEYORS, AND 3 PLY ¼ COVER BELT FOR 48" TOP
CONVEYOR.
- ALL WITH VULCANIZED SPLICES
- ORANGE GUM RUBBER FLASHING ON LOWER (4) CROSS CONVEYORS
- STD FABTEC COMBI WIPERS
(2) 60" UNDER SCREEN CONVEYORS, RUN OPPOSITE OR RUN TOGETHER:
- 20 HP SEW RIGHT ANGLE DRIVES, DODGE SCM BEARINGS, 2-15/16 SHAFTS.
- 3-PLY BELT 1/4" COVER, VULCANIZED SPLICES.
- 32" SPACING ON CEMA C IDLERS.
- UNDER SCREEN HOPPERS WITH WEAR STRIPS AND ADJUSTABLE SKIRT BOARD
WIPERS.
- VULCANIZED LAGGED HEAD PULLEYS AND SELF-CLEANING WING TAIL
PULLEYS.
- FULL LENGTH FORMED SKIRT BOARDS.
- ORANGE GUM RUBBER FLASHING
- 60" NAVIGATOR ROLLERS ON (2) UNDERSCREEN BELTS.
- 60" SUPERIOR X-TERRA BELT SCRAPER - QTY (3) ON UNDERSCREEN CONVEYORS
42" X 46' OVER HEAD FEED CONVEYOR, 20 HP TEFC:
- SEW RIGHT ANGLE SHAFT MOUNT REDUCER.
- DODGE SCM BEARINGS AND TYPE E BEARING ON HEAD END.
- 3-PLY BELT, 1/4" COVER; CEMA C CHANNEL INSET IDLERS.
- VULCANIZED LAGGED HEAD PULLEY & WING TAIL PULLEY.
- FORMED SKIRT BOARD FULL LENGTH.
- HYDRAULIC RAISE AND LOWER OF FEED CONVEYOR.
- LIGHTER, MANUALLY REMOVED 2 PIECE STYLE SPLITTER BOX WITH EXTENSIONS
- CANOE LINER SKIRTING IN FEED HOPPER OF OVERHEAD
- V-PLOW ON RETURN SIDE
- 20" FOLD DOWN WALKWAYS WITH DIAMOND PLATE FLOOR BOTH SIDES OF SCREENS AND BACK
PLATFORMS, 42" TUBE STEEL HANDRAILS, AND ACCESS LADDERS.
WALKWAYS RAISED 18” ON EACH SIDE OF SCREENS:
- BACK PLATFORM WILL REMAIN AT NORMAL LOWER POSITION.
- TOE BOARD ON BOTH SIDES OF WALKWAYS.
- REQUIRES ADDITIONAL SUPPORTS & BRACKETS.
- INCLUDES STEPS BETWEEN WALKWAYS AND REAR PLATFORM.
- EXTRA LOWER PLATFORMS AT SCREEN GEAR BOX FOR SCREEN MAINTENANCE.
- ADDITIONAL BELT GUARDING FOR FEED CONVEYOR. (PVC CURTAIN MOUNTED ON CONVEYOR)
- WALKWAYS FOLD FOR SHIPPING.
- 1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD
WIPERS.
- AR LINED PRODUCT DISCHARGE CHUTES TO DISCHARGE ONTO PRODUCT CROSS CONVEYORS
- 1/3 - 2/3 -PANEL STYLE BLENDING FOR 2ND TO 3RD DECK.
4 AXLE CARRIER DROP CENTER STYLE (TANDEM / TANDEM):
- 24" WF 68# BEAMS.
- RIDE-WELL AIR RIDE SUSPENSION:
- 25,000 # AXLES. MAX AIR BAG STOPS.
- AIR BRAKES, BRAKE LIGHTS, MARKER LIGHTS, REFLECTIVE TAPE, AND MUD
FLAPS.
- LED AND STROBE LIGHTS.
- GROUND SUPPORT STANDS.
- FRONT TOW HOOKS
- TRAIL KING 9FT BOOSTER CONNECTION POINT WITH AIR AND ELECTRICAL (NO BOOSTER)
- ALUMINUM WHEELS ALL AROUND - POLISHED EXTERIOR, BRUSHED INTERIOR
- SAFETY GUARDS, SANDBLASTED CHASSIS, RUST INHIBITOR PRIMER, AND TWO FINISH
COATS OF PAINT INCLUDED: PAINTED RAL 7024 GRAPHITE GRAY.
OPTIONS INCLUDED:
FABTEC 70K 6 LEG RUN-ON SYSTEM KIT:
- 12V HYDRAULIC PACKAGE AND SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.
- 18" STROKE CYLINDERS 70,000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT.
- HEAVY DUTY FOOT PADS.
(2) - FAB TEC 48K RUN-ON LEG KIT WITH SWIVEL MOUNTS ON FRONT OF CHASSIS:
- 5 X 24" CYLINDERS 48,000 LB CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT.
- 24” STROKE.
- SWIVEL MOUNTING PLATE.
- CYLINDER MOUNTING HARDWARE.
- HEAVY DUTY FOOT PADS.
- HYDRAULIC CYLINDER FOR SWIVEL UP AND DOWN OF LEG.
- WORKS WITH 70K RUN ON LEG KIT.
SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START.
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION.
- 2 1/2 GPM PUMP.
- (2) TOOL BOX MOUNTED ON CHASSIS.
- SLIDE IN REJECT CONVEYOR CAPABILITY OVER AXLE SCREEN.
- RUBBER DISC RETURNS ON ALL CONVEYORS ~VS~ STEEL CANS.
- REMOTE GREASE LINES FOR UNDER SCREENS TAIL PULLEY BEARINGS
- 9X18 RUBBER LINERS IN FEED BOXES OF SCREENS, SCREEN DISCHARGE CHUTES, PRODUCT
CHUTES.
SAFETY TIE-OFF CABLES -STAND ALONE- BOTH SIDES OF BOTH SCREENS
AES ELECTRICAL SWITCHGEAR FOR TWIN 7203-38 SCREENING PLANT:
- MAIN IN 60X48 HOFFMAN ENCLOSURE
- ABB FVNR NEMA RATED STARTERS WITH CIRCUIT BREAKERS
- (1) 50 HP FVNR FOR SCREEN 1
- (1) 50 HP FVNR FOR SCREEN 2
- (2) 20 HP FVNR FOR UNDER SCREEN 2, OH FEED CONVEYOR
- (1) 20 HP FVR (REVERSING) FOR UNDERSCREEN 1
- (4) SPARE 60 AMP FEED BREAKERS WITH 60 AMP HUBBELL RECEPTACLES
- (1) SPARE 100 AMP FEED BREAKER WITH 100 AMP HUBBELL RECEPTACLE
- (1) 5 HP SIZE #1 FOR SIRC WITH 20 AMP HUBBELL RECEPTACLE
- (5) 7.5 HP FVR (REVERSING) FOR 5 CROSS CONVEYORS
- CPT TRANSFORMER: BASIC
- PANEL SETS ON GROUND FOR OPERATION – TRAVELS OVER KINGPIN END FOR WEIGHT
DISTRIBUTION
- 150FT REMOTE PENDANT WITH FWD/REV SWITCHES, HOUR METER IN DOOR, D-
SHELL(PHOENIX PIN CONNECTOR ONE END)
- SAFETY START HORN - E-STOP IN PENDANT AND IN DOOR OF PANEL
- (150 FT)250W SINGLE CONDUCTOR POWER CORD
- PANEL SETS ON GROUND FOR OPERATION - MOTOR CORD COME OFF PLANT IN SINGLE
LOCATION, ALLOW 30FT TO MOVE PANEL AWAY FROM PLANT
- CORD CAGE AND LEG KIT: D-RING LIFTERS
GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS’ GUARDING WILL MEET ALL LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A LOCAL INSPECTOR, PRIOR TO STARTUP OF EQUIPMENT OPERATIONS, CORRECTIVE ACTIONS AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER