PHP ₱20,785,067
Machine Location:4300 Main AveFargo, North Dakota, USA 58103(Opens in a new tab)
Seller Information
View Seller InformationGENERAL EQUIPMENT & SUPPLIES INC
Contact:Sales Department
Phone:+1 701-213-4058
Fargo, North Dakota, USA 58103
General
Year
2023
Manufacturer
VALE INDUSTRIES
Model
4218DBF
Serial Number
23V0010
Condition
New
Stock Number
E00065642
Description
VALE 4242FP-18G (4218DBF) BELT FEEDER EQUIPPED AS PER BELOW:
PLANT DESIGN:
- 300-900 TONS/HOUR AT 20 TO 60 FPM
- BASED ON 100 PCF MATERIAL
20YD3 HOPPER:
- 3/8" PLATE HOPPER SIDEWALLS, 1/4" VERTICAL END WALLS
- MATERIAL FLOW SELF-RELIEVING PROFILE AT SKIRT LEVEL
- HEAVY STRUCTURAL SUPPORT COLUMS AND HORIZONTAL MEMBER BRACING
- SELF-CLEANING VEE-CAP AROUND TOP LIP
- ADJUSTABLE FEEDER DISCHARGE GAT
- CANOE LINERS, 1.5" X 7" WITH 45 DEGREE BEVELED TOP ANGLE, BACK AND FULL-LENGTH
HOPPER SIDES
- INCLUDING SKIRT EXTENSION TO HEAD PULLEY
- SPILL CURTAINS
- 2 PLY RUBBER CURTAINS, BOTH SIDES OF HOPPER-FEEDER AND FULL LENGTH
- BOLT-IN FRAME MOUNTED TO HOPPER LEGS
8.5' X 18' GRIZZLY:
- REVERSIBLE SIDE GRIZZLY POSITIONING
- 80 DEGREE DUMP ANGLE, 45 SECOND CYCLE TIM
- RUBBER CURTAIN IN-HOPPER ON DISCHARGE SIDE, PREVENTING SPILL AND BUILD-UP
- SELF-RELIEVING 6" SPACING
- GRIZZLY POP UP RODS
42" X 22' FEEDER:
- 42" BELT 375/3 PLY 1/4X1/16 D6 PREMIUM COVER BELT, VULCANIZED
- 16X44 HEAD DRUM PULLEY, CERAMIC LAGGED, 407-1045 SHAFTING, S-2000 307 ROLLER
BEARING
- 14X44 WING TAIL PULLEY WITH SCREW TAKE-UP, 307-1045 SHAFTING, S-200 307 ROLLER
BEARING
- FEEDER DRIVE FOR FVD CONTROL
- WEG 30 HP ELECTRIC MOTOR, VFD RATED
- SUMITOMO 102:1 RIGHT ANGLE SHAFT MOUNT REDUCER
- LIVE SHAFT C5 IMPACT IDLERS, 10" SPACING UNDER FEEDER TO HEAD
- RUBBER DISC RETURNS
- SUPERIOR BELT WIPER
- REMOVABLE CHANNEL CARTRIDGE STRUCTURE; GUARDS FOR TAIL AND IMPACT AREAS
48" X 50' DISCHARGE CONVEYOR:
- 48" BELT 330/3PLY 3/16X1/16 D6 BELT, VULCANIZEDS
- 14X44 HEAD DRUM PULLEY, 3/8 LAGGED, 1045 SHAFTING, 307 SCM BEARING UNITS
- 12X44 WING TAIL PULLEY WITH SCREW TAKE-UP, 1045 SHAFTING, 215 SCM BEARING
UNITS
- WEG 30 HP ELECTRIC MOTOR DRIVE:
- DODGE TA4207H15 SHAFT MOUNT REDUCER WITH BACKSTOP
- BX V-BELT DRIVE WITH GUARD
- PPI C5 20 DEGREE TROUGH IDLERS, 1'-6" IMPACT SPACING UNDER SKIRT, 3' STEEL
ROLL SPACING TO HEAD
- PPI RUBBER DISC RETURNS, 10' SPACING WITH PINCH GUARDS
- SUPERIOR BELT WIPER
- GUARDS FOR TAIL, HOPPER AND SKIRT AREAS
- FULL LENGTH TROUGH GUARD
- 26.5" DEEL CHANNEL TRUSS, WITH HEAD TUB-IN-TUBE SUPPORTS
HYDRAULIC GRIZZLY DUMP PACKAGE:
- POWER UNIT WITH 10HP ELECTRIC MOTOR AND PUMP PACKAGE
- RESERVOIR WITH FILLER/BRATHER, SIGHE LEVEL INDICATOR, FILTER, PRESSURE RELIEF
- GRIZZLY DUMP CYLINDER PAIR, HOSES AND FITTINGS
HYDRAULIC DISCHARGE CONVEYOR LIFT PACKAGE:
- 12V HPX POWER UNIT
- LIFT CYLINDER, HOSE AND FITTINGS
PLANT STRUCURE AND FEATURES:
- WF MAIN BEAMS AND PRIMARY CROSS MEMBERS
- RIGID STRUCTURAL SUPPORT FRAME UNDER HOPPER, FOR DIRECT SETTING ON PIT FLOOR
- RIGID SUPPORT FRAME AND HINGED FRONT WALL, FOR RAMP-UP AND SPILL PROTECTION
- RUBBER CURTAINS WITH BOLT-IN FRAME, FOR SPILL PROTECTION AT FEEDER LEVEL
- ADJUSTABLE FEEDER DISCHARGE GATE
- FULL LENGTH SKIRD ON DISCHARGE CONVEYOR
HIGHWAY TRANSPORT:
- TANDEM AXLE WITH DUAL 11R22.5 TIRES, AXLE WITH SPRING SUSPENSION
- LANDING GEAR, HOLLAND MKV WITH 2 STAGE GEARING
- AIR BRAKES, 5TH WHEEL PIN, LIGHTS, REFLECTIVE TAPE, MUD FLAPS
OPTIONS INCLUDED IN PRICE:
- GRIZZLY PROPS
- FLIP-UP SUPPORT LEGS (4), PERMANENT MOUNTED ON GRIZZLY HINGES
- SWITCHGEAR BRACKETS
- PLANT MOUNTED FOR SG PANEL
- SWING DOWN BLOCK LEGS
- SWING DOWN BLOCK LEGS AT KINGPIN AREA OF CHASSIS
- URETHANE PREMIUM COATING PAINT, PAINTED GRAPHITE GRAY WITH SAFETY YELLOW
GUARDING
- ONE OWNERS MANUAL AND PARTS LIST
ELECTRICAL SWITCHGEAR AS PER BELOW:
- 48X36 ENCLOSURE AND PANEL
- DRIP SHIELD
- PLANT MOUNTED
- 150 AMP MAIN BREAKER WITH EXTERNAL OPERATOR
- 133.8 AMPS FLA
- ILLUMINATED EMERGENCY STOP
- MANUALLY OPERATED START SIGNAL
- 30 HP FEEDER BELT
- 80 AMP CIRCUIT BREAKER
- ABB ACS 880 VFD
- 30 HP DISCHARGE CONVEYOR
- 80 AMP CIRCUIT BREAKER
- NEMA/IEC RATED SIZE 3 MOTOR STARTER
- 20 HP SPARE MOTOR
- 60 AMP CIRCUIT BREAKER
- NEMA/IEC RATED SIZE 2 MOTOR STARTER
- WIRED TO A 60 AMP HUBBELL RECEPTACLE
- 10 HP HYDRAULIC GRIZZLY MOTOR
- 25 AMP CIRCUIT BREAKER
- NEMA/IEC RATED SIZE 1 MOTOR STARTER
- WIRELESS REMOTE KIT REMOTE FUNCTION CONTROLS FEEDER START/STOP,
FEEDER SPEED UP/DOWN, TIMED GRIZZLY CYCLE
- MANUALLY OPERATED START HORN
- EMERGENCY STOP
- 150' OF MAIN POWER CORD
- GUARDING: FOR DRIVE AND TAIL PULLEYS, V-BELT DRIVE AND RETURN IDLERS. GUARDS
MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING
INSPECTED.