PHP ₱39,125,265
Rental Prices:
Monthly: PHP ₱2,059,224
(Price entered as USD $35,000)
Lease Prices:
Call For Availability
Machine Location:14411 US-2Medical Lake, Washington, USA 99022(Opens in a new tab)
Seller Information
View Seller InformationMaxim Equipment
Contact:Joe Jensen
Phone:+1 209-781-4068
Ripon, California, USA 95366
Rental Contact Information
Maxim Equipment
Contact:Joe Jensen
Phone:+1 209-781-4068
Ripon, California, USA 95366
General
Year
2021
Manufacturer
IROCK
Hours
2,360
Model
ITC300
Serial Number
92011
Condition
Used
Stock Number
211004 CC10
Description
CRUSHING CHAMBER…
Metso HP300 Cone Crusher
Feed opening: 41” (1050mm)
Crusher input speed: 750 - 950 rpm
Crusher Drive: Direct drive
Closed side setting adjustment: Hydraulic
Level sensor: Ultrasonic
Throw: 3.3” (84 mm) at discharge with new liners
Power required: 300 Hp
FEEDER…
Feeder opening width: 36” (910 mm)
Feeder drum crs.: 19’ – 8.2” (6.0 m)
Drive: Hydraulic
Feeder belt width: 48” (1200 mm)
Motor: Danfoss OMSS 125
Gearbox: Bonfig 809 W2 24.2:1
Flow rate: 33.8 GPM (128 LPM)
Adjustable speed: Yes
Maximum speed: 42 rpm
HOPPER…
Length: 12’ – 4.9” (3.78 m)
Width: 7’ – 2” (2.2 m)
Volume: 6.5 yd3 (5 m3) levelled off, 8.1 yd3 (6.2 m3) heaped
Material: ¼” sides + 3/8” Hardox® liners
MAIN CONVEYOR…
Stockpile height: 12’ – 9” (3.887 m)
Belt width: 48” (1200 mm)
Belt spec: Plain 500/3 8+2
Drive drum dia.: 13.7” (350 mm)
Tail drum dia.: 10.6” (270 mm)
Motor: OMV800
Flow rate: 23.7 GPM (89.6 LPM)
Maximum speed: 112 rpm
Angle adjustable: YES
Quick release: YES
POWERUNIT AND HYDRAULICS
Engine: Volvo D13 Tier 5
Engine power: Volvo - 380 Kw (510HP)
Engine speed: 1570 - 1900 rpm
Cone drive clutch: PT-tech HPTO14TF1
Flywheel Pump 1 (Tracks/Feeder): Kawasaki K3VL80
Flywheel Pump 2 (Tracks/Main conveyor): Kawasaki K3VL80:
LH PTO Pump 3 (Auxiliary/Lube/pilot): Turolla 29/29/10
Total system flow (max): 88.5 GPM (335 LPM)
Hydraulic tank capacity: 211 gal (800 L)
ELECTRICS…
Emergency stops: 4 off, 2 feeder, 2 power unit
Chassis cabling: Armored cable
Start Siren: YES – 10 sec delay
Control panel: Tedd Engineering / IFM
Engine shutdowns:
• Low oil pressure
• High water temp
• Air filter blockage (selectable)
• Fuel contamination
• Low hydraulic tank level
• Low lube oil flow
• Low lube oil pressure
• High lube oil temperature
• High hydraulic oil temperature
Radio control tracks and feeder: STANDARD
Pendant track control: YES – plugged in control cabinet
TRACKS…
Width: 15.7” (400 mm)
Length: 13’ – 5.4” (4.1 m) crs
Height: 32” (817 mm)
Gearbox: Bonfiglioli 711
Ratio: 144:1
Motor: Rexroth A2FE90
Speed max: 0.93 mph (1.50 kph)
Flow rate: 40.2 GPM (152 LPM)
Multiple speeds: Three speed system selectable at control panel with smooth start / stop
CAPACITIES…
Diesel tank capacity: 290 gal (1100 L)
Hydraulic tank capacity: 211 gal (800 L)
SAFETY FEATURES…
External belt alignment points
External grease points
Engine safety shutdown systems
Full safety guarding for nip points