Machines For Hire From Stan Houston Equipment

Allen Engineering MP235 Edger Ride-On Trowel • Unique rotating guards rings allow you to run along the edges of walls, columns and pipes • The MP235 allows you to edge within 7.93mm of a wall usi...See More Details

Bobcat MT85 Mini Compact Track Loader - Easily fits through gates, doorways or other narrow spaces - Smooth ride for less spillage of material transportation - Ergonomically-designed ISO joys...See More Details

Bobcat MT100 Mini Track Loader - 1,000-lb. rated operating capacity - Ideal for uses include trenching, digging, carrying materials, demolition, site preparation and snow removal - Tool-free ...See More Details

BOMAG BMP 8500 Multipurpose Compactor - ECOMODE - Drum extensions (610/850mm) - Hydrostatic articulated steering, maintenance free - Combination remote control cable/radio - Dual directe...See More Details

BOMAG BW900-50 Tandem Roller - Ideal for footpaths and repair work as well as finishing work in road construction. - Compact BOMAG tandem rollers can also be used in landscaping.

Chicago Pneumatic AR90G Small Articulated Tandem Asphalt Roller - The gasoline-powered AR90G is used primarily for small-scale compaction work including patching, bicycle paths, parking lots and d...See More Details

Chicago Pneumatic CPP6 T4F - Pump - High efficiency: 75% (B.E.P.) - Rapid “dry” priming up to a height of 8.5 m (27.5 ft) - High resistance to abrasive liquids and turbid sandy waters - Sem...See More Details

Chicago Pneumatic CPS 185 JD Air Compressor - CPS 185 JD Tier 4-Interim 185 cfm portable air compressor is equipped with a water-cooled, 49-horsepower, four-cylinder John Deere engine. - Featur...See More Details

Canycom SC75 Track Buggy - Works well in wet and muddy ground, rough and uneven terrain, sand and gravel - 90 degree dump angle - Rubber Tracks - Hydrostatic transmission - Honda gas pow...See More Details

Canycom USA, Inc. Rubber Track Buggy - Works well in wet and muddy ground, rough and uneven terrain, sand and gravel - 90 degree dump angle - Rubber Tracks - Hydrostatic transmission - H...See More Details

EDCO 2EC 1.5B Two-Disc Concrete Floor Grinder 50100 - Electric Motor 1.5 HP, 60HZ, 1-Phase 115/230V - Production grinding and floor cleaning on large or small surface areas such as airports, wa...See More Details

EDCO TL-9 Turbo-Lite Direct Drive Floor Grinder 58900 - 9" working width can grind 350-400 sq ft per hour - Ideal for resurfacing, smoothing rough floors, removing hard coatings, removing thic...See More Details

EDCO TG-10 11HP Turbo Grinder 56600M - 10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with EDCO Dyma-Dots tooling. - Grind wet or dry - Includes 10″ Magna-Trap® ...See More Details

EDCO TG10 Turbo Grinder 56900 - Baldor Electric Motor, 5HP, 1PH, 6Hz 230V - Turbo grinder with 10" rigid head - Rigid Head - ideal for grinding uneven expansion joints, high spots, joint curl...See More Details

EDCO TMC-7-2 Turbo Edge/Combo Grinder 57200 - 7" working width will grind about 400-500 lineal ft per hour at 1/16" with EDCO Diamond Cup Wheel - Flex head ideal for grinding and vertical surfa...See More Details

EDCO ED33125K Vacuum System 200 - Used for dust control with EDCO Grinders, Scarifiers, Scabblers, and Hardscape & Masonry Saws. - Ideal for a variety of indoor and outdoor working environment...See More Details

Gehl DL11-55 Gen:3 Telescopic Handler: Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP ...See More Details

Gehl DL11-55 Gen:3 Telescopic Handler: Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP ...See More Details

Gehl DL12-55 GEN:3 Telescopic Handler - Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged or if the boom is raised 60 degrees or higher. - 10-degree ...See More Details

Gehl DL12-55 GEN:3 Telescopic Handler with PWP Platform - Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or highe...See More Details

Gehl RS5-19 Telescopic Handler • 5,500 lbs. (2495 kg) Capacity • Fork Tilt Joystick • 3,000 lbs. (1361 kg) Capacity at Full Lift Height • SAHR Parking Brake • Maximum Lift Height - 19 ft. 1 in...See More Details

Gehl RS6-42 Telescopic Handler Automatic Self-Leveling Fork System • 6,600 lbs. (2994 kg) Capacity • Boom Control Joystick • 6,600 lbs. (2994 kg) Capacity at Full Lift Height • Fork Til...See More Details

Gehl RS8-42 Telescopic Handler • Automatic Self-Leveling Fork System • 8,000 lbs. (3629 kg) Capacity • Boom Control Joystick • 7,000 lbs. (3175 kg) Capacity at Full Lift Height • Fork Tilt and...See More Details

Gehl RS8-44 Telescopic Handler: • Automatic Self-Leveling Fork System • 8,000 lbs. (3629 kg) Capacity • Boom Control Joystick • 7,000 lbs. (3175 kg) Capacity at Full Lift Height • Fork Tilt an...See More Details

Gehl RS10-44 Telescopic Handler • 10° Frame Leveling (Left or Right) • 10,000 lbs. (4536 kg) Capacity • Automatic Self-Leveling Fork System • 8,000 lbs. (3629 kg) Capacity at Full Lift Height ...See More Details