PKR Rs11,224,862.54
Seller Information
View Seller InformationTraxPlus
Contact:Sales Department
Phone:+1 601-819-7042
Hickory, Mississippi, USA 39332
General
Category
Brush Mulcher/Shredder
Year
2023
Manufacturer
DENIS CIMAF
Model
DAF150D
Serial Number
N/A
Condition
New
Description
The DAF is an industrial high-power forestry brushcutting-mulching system that can be installed on most compact loaders or other dedicated forestry carriers. DAF brushcutters and mulchers are designed for vegetation control work.
Motor
- Variable displacement, axial-piston motors that minimize overheating and improve re-acceleration.
Drive
- Industrial cogged belt drive system that prevents slippage and reduces effort applied to bearings compared with V-belts, for longer bearing life.
Rings
- Protective rings that limit the size of the bites and considerably reduce risks of breakage on the knife holders.
Knives
- Heat-treated, bolt-on forged knives that deliver maximum resistance to impact and abrasion, and that can be sharpened right on the unit.
Easy replacement
- Easy-to-replace knives: A single nut and bolt holds the knife in place. Replacing worn knives is a very easy.
Replaceable Liner
- With the high speeds and forces involved in industrial mulching, even the hardest steel frame is subject to wear and tear. This easy-to-replace, bolt-in wear liner extends the lifetime of the unit by protecting the frame.
Hydraulic pushbar option
- Especially useful when working in older growth as a secure way to direct where big trees will fall when cutting them down
SPECIFICATIONS:
Approximate Min. Carrier Power [kW (hp)]: 60(75)
Cutting Width [cm (in)]: 150 (59)
Cutting Distance from Ground Level [cm (in)]: 1 (0.4)
Number of Blades on Rotor: 21
Optimal Target Material Diameter [cm (in)]: 15 (6)
Exterior Width [cm (in)]: 182 (72)
Exterior Height (with Pushbar) [cm (in)]: 150 (59)
Exterior Width (with Pushbar) [cm (in)]: 122 (48)
Exterior Height (without Pushbar) [cm (in)]: 66 (26)
Exterior Width (without Pushbar) [cm (in)]: 72 (29)
Rotor Diameter [cm (in)]: 46 (18)
Approximate Typical Weight [kg (lbs)]: 1050 (2300)
HYDRAULIC SYSTEM:
Variable Displacement Axial Piston Motor [cc]: 1x 85
Required Continuous Flow [L/min (gal/min)]: 87 (23)
Max. Operating Pressure [bar (psi)]: 240 (3500)
Rotating Speed [rpm]: 2500
Pressure Line I.D. [# (in)]: #12 (0.75)
Return Line I.D. [# (in)]: #12 (0.75)
Drain Line I.D. [# (in)]: #8 (0.5)
OPTIONS:
Standard Sharpenable Bolt-on Forged Blades
Hydraulic Pushbar
Bolt-on wear liner
Specifications
Manufacturer
DENIS CIMAF
Model
DAF150D
Condition
New