2019 CATERPILLAR D6N XL

2019

CATERPILLAR

D6N XL

Used

Accurate / Verified

COME AND GET IT! VERY GOOD CAT D6N XL  THIS UNIT HAS NEWLY UPDATED PRODUCT LINK AND HAS BEEN DEALER MAINTAINED FROM DELIVERY SIX WAY BLADE RIPPER READY 24' PADS 129" SIX WAY BLADE - TIGHT AND WORK READY  ACCUGRADE READY GOOD UC TINWARE AND GLASS VERY GOOD ALL LIGHTS AND GAUGES FULLY OPERATIONAL OPERATOR STATION IN VERY GOOD CONDITION SPECIFICATION Dimensions Drawbar Height (Center of Clevis) from Ground Face of Shoes 23.5 in Ground Clearance 1.4 ft Height - Top of Cab 10.2 ft Length - Track on Ground 100.4 in Length of Track on Ground 8.5 ft Length w/o Blade 12.3 ft Track Gauge 6.3 ft Width Over Tracks 8.2 ft Engine Bore 4.4 in Displacement 439 cu in Engine Model Cat 3126B DITAAC Flywheel Power 145 hp (108 kw) Make Cat Net Power - EU 80/1269 145 hp (108 kw) Net Power - ISO 9249 145 hp (108 kw) Net Power - SAE J1349 143 hp (107 kw) Number of Cylinders 6 Power Measured @ 2200 rpm Stroke 5 in Operating Specifications Alternator Supplied Amperage 70 amps Cooling System Fluid Capacity 9.3 gal Final Drives Fluid Capacity 1.9 gal Fuel Capacity 79 gal Hydraulic Fluid Capacity 7.8 gal Operating Voltage 12 volts Service Refill Capacities Cooling System 10.8 gal Final Drive - Each 1.8 gal Fuel Tank 79 gal Hydraulic Tank 7.8 gal Standard Blade Capacity 4.2 cu yd Height 49 in Width 10.8 ft Transmission 1 Forward 2.1 mph (3 kph) 1 Reverse 2.5 mph (3 kph) 2 Forward 3.6 mph (5 kph) 2 Reverse 4.3 mph (6 kph) 3 Forward 6.3 mph (10 kph) 3 Reverse 7.4 mph (11 kph) Max Speed - Forward 6.3 mph (10 kph) Max Speed - Reverse 7.5 mph (11 kph) Number of Forward Gears 3 Number of Reverse Gears 3 Transmission Type powershift Undercarriage Ground Contact Area 4882 cu in Ground Pressure 7.4 psi Grouser Height 2.3 in Number of Shoes per Side 40 Number of Track Rollers per Side 7 Standard Shoe Size 24.1 in Track Gauge 6.3 ft

Yes

6-Way

Straight

39.32 m

Yes

Yes

65

80

Enclosed

Yes

Yes