2019 CATERPILLAR 938M

2019

CATERPILLAR

938M

6,299

J3R07806

Used

Accurate / Verified

very nice 2019 Caterpillar 938M with 6299 hours fully serviced ready to work, We have completely gone through the emission system, installed a new EGR valve and various components, this machine has been thoroughly cleaned inside and out... ....no unit codes.. its a very clean wheel loader..new bucket edges, new bucket pins & pin bosses installed, bucket is tight like new installed side cutters on fresh bucket, unit has a fusion quickcoupler installed: The Cat 938M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark. Engine Displacement 427cu in Bore 4in Stroke 5in Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine Model Cat C7.1 ACERT Note (1) * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. Note (4) Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). Maximum Gross Power 188hp Rated Net Power 182hp Maximum Rated Gross Power - Iso 14396 (Din) 190hp Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800rpm Maximum Rated Gross Power - Iso 14396 188hp Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4) 188hp Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4) 190hp Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4) 182hp Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4) 184hp Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4) 186hp Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4) 648lb ft Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4) 621lb ft Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4) 628lb ft Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600rpm Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*) 173hp Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*) 175hp Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 168hp Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 169hp Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*) 171hp Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*) 648lb ft Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*) 621lb ft Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*) 628lb ft Operational Operating Weight 36216lb Power Train Front Axle Fixed Rear Axle Oscillating Front Axle - Traction Aid - Standard Locking differential Rear Axle - Oscillation Angle By Tire Size - 23.5 R25 7 degrees Rear Axle - Traction Aid - Optional Limited slip differential Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. Note (2) Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M. Note (3) Offset rims available to meet European roading requirements. Brakes - Parking Spring applied hydraulically released Brakes - Service Outboard wet disc Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65 10.5 degrees Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder 7 degrees Transmission Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Steering Maximum Working Pressure - Steering Pump 3500 psi Steering Cylinder, Double Acting - Bore Diameter 3.1in Steering Cylinder, Double Acting - Rod Diameter 2in Steering Cylinder, Double Acting - Stroke 15.7in Maximum Steering Torque - 0 Degrees (Straight Machine) 42506lb ft Maximum Flow - Steering Pump 34 gal/min Maximum Steering Torque - 40 Degrees (Full Turn) 31398lb ft Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited 3.1 s Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed 2.3 s Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Transmission Forward And Reverse - Range 1* 1-13 km/h (0.6-8 mph) Forward And Reverse - Range 2 8mph Forward And Reverse - Range 3 17mph Forward And Reverse - Range 4 25mph Buckets Bucket Capacities 2.5-5.0 m3 (3.3-6.5 yd3) Operating Specifications Full Turn Tip Load 22107lb Service Refill Capacities Cooling System 8.5gal Fuel Tank 51.5gal Hydraulic Tank 23.8gal Hydraulic System - Including Tank 44.9gal Engine Crankcase 5.3gal Transmission - Gear Box 2.9gal Diesel Exhaust Fluid (Def) Tank 5gal Front Axles 9.2gal Rear Axles 9.2gal Cab Rops ISO 3471: 2008 Fops ISO 3449: 2005 LEVEL II Note (1) Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab Note (2) * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. Loader Hydraulic System Lift Cylinder, Double Acting - Stroke 31.1in Tilt Cylinder, Double Acting - Stroke 21.9in Maximum Flow - Implement Pump 50 gal/min Note (1) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. Note (2) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. Note (3) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Maximum Working Pressure - Implement Pump 4061 psi Lift Cylinder, Double Acting - Bore Diameter 4.7in Lift Cylinder, Double Acting - Rod Diameter 2.6in Tilt Cylinder, Double Acting - Bore Diameter 5.9in Tilt Cylinder, Double Acting - Rod Diameter 3.5in Relief Pressure - Tilt Cylinder 4351 psi Maximum Flow - Implement Pump - 3rd Function* 50 gal/min Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift) 5.5/6.2 seconds Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height) 1.5/1.7 seconds Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level) 2.7/2.7 seconds Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time 9.7/10.6 seconds Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min Relief Pressure - Tilt Cylinder - 3rd And 4th Function Maximum Working Pressure 4061 psi Relief Pressure - Tilt Cylinder - 3rd And 4th Function Relief Pressure 4351 psi

Yes

1

Yes

Yes

Yes

Radial

55

55

Yes

Yes

Enclosed

Yes

4

Halogen

Yes

Good

Yes

Yes