2023 FINLAY I-120RS

2023

FINLAY

I-120RS

TRX120RSCOMNC0465

New

E00064054

FINLAY I-120RS TRACKED IMPACTOR PLANT EQUIPPED AS PER BELOW: ENGINE: - TIER 4 FINAL/STAGE IV: SCANIA DC9 257 KW (350 HP) ENGINE IMPACT CHAMBER: - TEREX CR028 IMPACT CHAMBER - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE - 4 BAR ROTOR - MARTENSITIC CERAMIC BLOW BARS 2 HIGH AND 2 LOW - DIRECT DRIVE VIA CLUTCH - DRIVE BELT TENSIONER WHEEL - BLOW BAR LIFTING TOOL SUPPLIED - DRIVE PULLEY TO SUIT HIGHER SPEED RANGE - SMALLER ENGINE CHAMBER DRIVE PULLEY FITTED TO GIVE LOWER SPEED RANGE. STANDARD LARGE PULLEY STILL DISPATCHED WITH THE MACHINE HOPPER & FEEDER: - VGF FIXED HOPPER - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN, STANDARD 50MM SPACING - MESH APERTURE ON GRIZZLY FEEDER: 38MM - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR - BLANKING MAT FOR VGF INDEPENDENT PRE-SCREEN: - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND BLANKING MATT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD - MESH APERTURES AVAILABLE UPON REQUEST - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS - PRE-SCREEN PUNCH PLATE OPTIONAL SPACING 63MM MAIN CONVEYOR: - 1100MM (43.3") BELT FULL LENGTH - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STAINLESS STEEL LINERS (C/W SHORTENED MAIN CONVEYOR) AUXILIARY: - HYDRAULIC RAISE/LOWER FOR MAGNET CONVEYORS: - PIPED FOR OVER BAND MAGNET - BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT, DISCHARGING TO THE RHS OF THE MACHINE - TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL DISCHARGE CHUTE, DISCHARGING TO RHS OF THE MACHINE RS COMPONENTS: - 3.663 X 1.52M (5' X 12" 2-DECK SCREEN)- CLOTH NOT INCLUDED - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH DECKS - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW FOR STOCKPILING OVERSIZE MATERIAL - 1400MM (55") WIDE BELT FINES CONVEYOR - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY - BELT WEIGHER BELT SCALE INSTALLED - ADDITIONAL TRANSFER & STOCKPILE CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECK OF SCREEN BOX, GIVING MIDDLE GRADE PRODUCT CLIMATE SPEC: - STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEG. C) DUST SUPPRESSION: - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS ELECTRICAL: - EMERGENCY STOPS - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD - T-LINK TELEMETRY SYSTEM FITTED C/W 7 YEAR DATA SUBSCRIPTION - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK MOVEMENT - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET GUARDING: - GUARDING: FOR DRIVE AND TAIL PULLEYS, GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED.