PKR Rs9,775,840
Seller Information
View Seller InformationShaker Equipment Sales
Contact:Daniel Smith
Phone:+1 270-238-7018
Auburn, Kentucky, USA 42206
General
Year
2024
Manufacturer
LIUGONG
Model
9027FZTS
Hours
6
Condition
New
Hours Meter Inaccurate/Broken/Rolled Over
Accurate / Verified
Description
New with Quick Attach, Hydraulic Thumb. 3 Year / 4000 hour Full Warranty , 5 Year / 7000 hour Powertrain and Hydraulic Warranty
ENGINE
Emissions rating EPA Tier 4 Final - Stage V
Make Yanmar
Model 3TNV80F
Aspiration Natural
Cooling fan drive Direct
Displacement 77.3 in³ (1.267 L)
Output power 20.4 hp (15.2 kW) @ 2,500 rpm
Peak torque 49.6 lb·ft (67.3 N·m) 1,800 rpm
Cylinders 3
Bore × Stroke 3.1 in x 3.3 in (80 mm × 84 mm)
HYDRAULIC SYSTEM
Main Pump
Type Load-sensing variable piston pump
Maximum flow 22.8 gal/min (86.4 L/min)
Relief Valve Setting
Implement 3,133 psi (21.6 MPa)
Travel circuit 3,133 psi (21.6 MPa)
Slew circuit 2,698 psi (18.6 MPa)
Pilot circuit 566 psi (3.9 MPa)
Hydraulic Cylinders
Boom Cylinder
Bore × Stroke 2.7 in x 20.1 in (70 mm x 510 mm)
Arm Cylinder
Bore × Stroke 2.7 in x 19 in (70 mm x 482 mm)
Bucket Cylinder
Bore × Stroke 2.5 in x 15 in (65 mm x 382 mm)
SERVICE CAPACITIES
Fuel tank 7.1 gal (27 L)
Engine oil 1.2 gal (4.4 L)
Cooling system 1.3 gal (5 L)
Hydraulic reservoir 6.9 gal (26 L)
UNDERCARRIAGE
Rubber track assembly 12 in (300 mm)
Bottom rollers each side 3
Top rollers each side 1
SWING SYSTEM
Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
Swing parking brake resets within five seconds after swing pilot controls return to
neutral.
Swing speed 9.5 rpm
Swing torque 3,395 lbf·ft (4,600 N·m)
DRIVE & BRAKES
2-speed axial piston motors with oil disk brakes. Steering controlled by two detachable
hand levers with pedals.
Travel speed High: 2.8 mph (4.5 km/h)
Low: 1.7 mph (2.7 km/h)
Gradeability 30° / 58%
Max. drawbar pull 5,530 lb·ft (24.6 kN)
ELECTRIC SYSTEM
System voltage 12 V
Battery 12 V (one)
Alternator 12 V - 40 A
Starter motor 12 V - 1.9 hp (12 V - 1.4 kW)
SOUND PERFORMANCE
Interior sound level (ISO 6396) 79 dB(A)
Exterior sound level (ISO 6395) 93 dB(A)
WORKING RANGES
Description Standard Cab Standard Canopy
Boom 6 ft 10 in (2.08 m)
Arm 4 ft 3 in (1.3 m)
A Max. digging reach 15 ft 7 in (4,757 mm)
B Max. digging reach at ground level 15 ft 3 in (4,648 mm)
C Max. digging depth 9 ft 4 in (2,857 mm)
D Min. front swing radius 6 ft 5 in (1,965 mm)
E Max. vertical wall digging depth 7 ft 7 in (2,312 mm)
F Max. digging height 14 ft 4 in (4,365 mm)
G Max. dumping height 10 ft 1 in (3,067 mm)
Max. digging depth 2.5m (8 ft 2 in) level bottom 7 ft 10 in (2,386 mm)
Dozer up 1 ft 2 in (350 mm)
Dozer down 1 ft 4 in (400 mm)
Bucket digging force (ISO) 4,496 lbf (20 kN)
Arm digging force (ISO) 2,698 lbf (12 kN)
Bucket capacity 0.065 yd3
(0.05 m3)
Bucket tip radius 2 ft 2 in (662 mm)
DIMENSIONS
Standard Cab Standard Canopy
Boom 6 ft 10 in (2.08 m)
Arm 4 ft 3 in (1.3 m)
A Shipping length 13 ft 8 in (4,160 mm)
B Max. shipping height to top of cab/canopy 8 ft 1 in (2,450 mm)
C Track gauge 4 ft 1 in (1,250 mm)
D Undercarriage width 5 ft 1 in (1,550 mm)
E Length to center of rollers 5 ft 1 in (1,540 mm)
F Track length 6 ft 5 in (1,953 mm)
G Track width 12 in (300 mm)
H Tail swing radius 2 ft 7 in (775 mm)
I Counterweight ground clearance 1 ft 9 in (530 mm)
Max boom offset to the right 2 ft 3 in (694 mm)
Max boom offset to the left 1 ft 8 in (498 mm)
Max boom swing angle to the right 54.5°
Max boom swing angle to the left 74°
Category Specific
Operating Weight
2,721.55 kg
Quick Attach
Yes
Thumb
Yes
Thumb Type
Hydraulic
Exterior
ROPS
Open
Engine
Horse Power
14.91 kW
Engine Manufacturer
Yanmar