2020 CASE IH 8250

2020

CASE IH

8250

YKG241191

1,190

Used

UH5799

*AUTO COMBINE ADJUST - Combine Automation AFS Harvest Command combine automation self-adjusts to maximize productivity and/or grain quality currently supported for corn, soybeans, wheat, and canola Includes: Sieve pressure sensors 425646 - Yield Monitor, HvstC, w/camera Must select: 425362 or 425567 - Feedrate Feeder Drive 425634 or 425635 - 2-speed elevator with grain camera Required when AFS Harvest Command is selected: 425648 - Auto Cleaning Fan 425616 - In cab adjust Cage Vane 425620 - In ca *AUTOGUIDANCE NAV = Autoguidance Nav Controller Nav III Controller *GPS ANTENNA/RECEIVER = 372 GPS Receiver- Omni HP/XP Factory Installed Auto Guidance Precision Farming Includes: Antenna / 372 Receiver WAAS, GLONASS, Omni Star HP/XP for yield mapping. Receiver can be upgraded to RTK. RTK radio sold separately. *AUTOGUIDANCE = Autoguide Rdy w/GPS mnt AFS AccuGuide Ready combine. Includes electronic steering valve, steering manifold, hydraulic hose, mounting bracket for Nav II controller, antenna receiver mount and wiring harness. *PF PACKAGE = Yield Monitor, HvstC, w/camera AFS - includes sensors, wiring, brackets and external storage device. With grain camera. Included with AFS Harvest Command combine automation *TELEMATICS = TEL 1YR SUB, FT RDY In Base TELEMATICS 1 YR ADVANCED *CONNECTIVITY CARRIER = PCM 4G CANADA PCM 4G Canada 4G P&CM controller for Canadian or LIMITED USA Market AT&T SIM This device is the only option for Canadian markets, and should also be ordered for USA markets that have poor or no Verizon Cellular coverage. *PowerPlus CVT drive w/feedrate PowerPlus CVT w/Feedrate control automatically maximizes harvest productivity in varying crop conditions by adjusting ground speed to optimize crop to combine load. MY19 Feedrate control monitors ground drive power and engine load to determine crop processing power consumption, the feeder torque sensor is no longer required. 425362 or 425567 required when AFS Harvest Command is selected. The PTO feeder output shaft is changed to a 21 tooth spline. See header secti *FDR STR RFA MD 1H Stone Trap, In Cab Remote Feeder Faceplate Fore/Aft, 11,500 lb lift, Single High Capacity Lateral Tilt Medium Duty (11,500 lb lift capacity) feeder w/ a stone trap with a single high capacity lateral tilt cylinder and in cab feeder faceplate fore/aft adjustment. Equipped with a standard capacity header drive. *Infeed / Transition = Ext Wear Cone_w/Std Cage Includes heat treated transition cone and inlet castings *Rotors = Extd. wear rotor w/spikes includes chrome alloy rasp bars throughout. For corn, soybeans, edible beans, small grains, and canola. Includes eight spiked chrome alloy rasp bars in separating area. *CAGE VANE CONTROL = IN CAB ADJ CAGE VANE In cab adjust Cage Vane Adjustable in cab rear 6 vanes with the vane control button on the RHC and vane position is displayed on the Pro 700 Display. Available without combine automation. Required when AFS Harvest Command is selected. *CONCAVES FACTORY INSTALLED = Sm wire, 3/16 in.-heat treated for small grain *Grates = Slotted for edibile beans *Auto Clean Fan RPM = AUTO CLEAN FAN RPM Available without combine automation. Required when AFS Harvest Command is selected. Automatic Cleaning Fan RPM Adjustment on Slopes: Automatically adjusts cleaning fan to maximize productivity while minimizing loss when harvesting on up or down hill slopes *Pre-Sieve = IN CAB ADJ PRE-SIEVE In cab pre sieve adjustable with a button on the RHC Available without combine automation. Required when AFS Harvest Command is selected *Upper Sieves = 1-1/8 in.adjustable,closz slat with 1-1/8 in. adjustable, grain slat pre-sieve *Lower Sieves = 1-1/8 in. grain slat -Elec *Elevator = Std. wear 2-speed eleva GR CAM 2-speed for high volume crops with grain camera. 425634 or 425635 required for AFS Harvest Command. *Grain Tank = Grain tank HC hyd covers 410 bushel capacity In cab hydraulic folding grain tank cover control for high capacity unload system. Requires HD planetry drives and axle extensions on the 7250 *UNLOADING AUGER = HC fold unload ext 50 ft. hdrs Folding unload auger extended wear for up to 50 ft. heads Unload length from center of machine - 34 ft. *Spout = Pivoting unld spout in-cab adj Electrically controlled pivoting unload spout to control grain flow up to 3 ft. *Unload Drive = HC independt cross auger ctrl Dual drive system for independent operation of grain tank cross augers. *MCDlx Chpr,WndrwChute,DlxSprd MagnaCut Deluxe Chopper, Windrow Chute, Deluxe Spreaders 120 blade extra-fine cut deluxe chopper (adds in cab chopper speed shift, counterknife bank adjust, and rotor discharge deflector adjustment) with windrow chute and deluxe adjust spreaders (in cab spreader distribution and right/left spreader direction controls) with in cab chop to swath (electric swath door actuator) and manual adjust windguards. *OPERATOR'S CAB = Luxury_cab All Deluxe Cab Features with the addition of heated-electric remote mirrors, leather wrapped steering wheel, three storage bins behind operator's seat, five storage shelves LH/RH "B-Posts," portable refrigerator, LH/rear window shades, rechargable LED work light, Pro 700 slide rail w/cup holder and smart phone cradle. *Monitor = Large color touch screen AFS Pro 700 Display - includes display, mounting bracket and wiring. Display mounted to right hand console. *Operator's Seat = Leather Seat Semi HT/VN Heated and ventilated red leather high-back operator seat and red leather instructor seat. Positive Response air suspension. *Radio and Speakers = AM/FM/WB/Bluetooth radio 4 Speaker system with 3.5mm aux. input and Bluetooth capable radio with mic. Sirius XM satellite ready. *Lights = LED Light Package Deluxe LED Lighting Package 6 Far Range, 2 Work Lamps, 2 row finder LED *Lighting = Distance lights Includes 2 additional LED lights, located on LH and RH mirror brackets. *Traction = Variable motor HD plan w/diff Planetary final drive with 175 cc Variable displacement motor, 215 cc pump WITH Diff Lock HD planetry drives and axle extensions are required on the 7250 with 410 bushel grain tank options *TRACTION WHEELS = 620/70R42 166A8 R1W Dual Goodyear, Firestone, and Michelin *Axel Extension = Axle Ext. 10.4" 265mm For use with 520, 580, and 620 duals set on 30 in. rows. Not compatible with tracks option. *Steering Axle = HD Adjustable steer axle 120 in. to 144 in. tread setting *Steering Tires = 750/65R26 166A8 R1W Goodyear, Firestone, Michelin, Mitas *Tire Brand - Goodyear *ENGINE COOLANT HEATER = Engine block heater *Trailer Hitch *Access Step Folding step that attaches to rear hitch for easy access to rear of machine. Only available with trailer hitch. Step not recommended with Dual Disc Spreaders. *ROTATING DUSTSCREEN BRUSH = CHAFF STRAIGHT BRUSH Straight Wand Attachment for High Chaff Conditions, straight brush *PERFORATED TROUGH = Grain storage *knife retention Kit *HD Pan kIt

Rotor

8

Yes

Yes

Yes

Duals

Yes

Yes

Yes