2022 JCI 6X20

2022

JCI

6X20

S225571

New

JCI 6x20 Screen WASH PLANT over 36” twin screw • JCI 6x20 Three Deck LP Screen • Superior 36”x25’ Twin Screw • Triple Axle Chassis constructed of Heavy Duty wide flange beam • Heavy Duty 25,000lb Leaf Spring Suspension with (12) 11R x 22.5 radial tires • Landing Jacks Qty. (4) Masaba Lift Only Jacks (power unit not included) • Brake Package – air brakes, emergency valve and plumbing • Light Package – brake and directional signals • Screen Motor – WEG 40hp 1200 rpm • Qty. (2) 24” x 11’ Cross Conveyors – reversible. With WEG 5hp motor, Dodge TXT#3 reducer, 10” lagged head pulley, 10” wing tail pulley, Superior CEMA B idlers and 3-ply 3/16” x 1/16” belting with Vulcanized Splice • Static Spray System – Manifold constructed of 8” x 8” tube with 8” 90 degree elbow inlet, mounted under catwalk. (3) Adjustable spray bars in slurry box with mini-manifold. Mini-manifold plumbed in parallel with 4’ line from main manifold, 2” outlets. Mini-manifold to be mounted on structure, not to be part of the structure. All spray bars capped with ball valves. Beaver tails on top deck spray bars and (13) brass nozzles on center and bottom deck spray bars. 3” up flow line to sand screw Pressure Gauge - 0 - 100 PSI on manifold, mounted in middle, on bottom, so it can be seen from the ground, second pressure gage mounted on mini manifold • 13hp Honda Electric Start Gas Power Unit – with pump, reservoir, filter, valve body and plumbing • Hydraulic Raise/Lower Slurry Box Slurry Box constructed of 3/8” AR steel, with (3) adjustable spray bars • Gate Valve to balance flow between screws • Cross-Over Inlet • Manual Roll Away Screen Overs Chutes top, center and bottom deck overs chutes constructed of 3/8” AR steel. Top and Bottom deck chute with blending gates allows blending into the center deck overs in 25% increments • Under Screen Flume constructed of 1/4" mild steel, with two rinse bars • Walkway & Ladder - diamond plate flooring with double handrail and kickplate on three sides of screen. (1) aluminum access ladder. (2) Bluewater Self Closing Gates – at catwalk access points, Extended walkway for roll away chutes • Safety Tie Off Cable – overhead cable for screen deck servicing • Cord Holder • Tool Box • Switchgear - with NEMA 4 enclosure, Square D Nema components, breakers, reversing starters for cross conveyors, three position start/stop pushbuttons, main disconnect, emergency stop, two extra #2 starters for 20 hp off plant motors and 100’ lead VFD - for fine material washer