INR ₹ 8,56,14,469
Machine Location:4300 Main AveFargo, North Dakota, USA 58103(Opens in a new tab)
Seller Information
View Seller InformationGENERAL EQUIPMENT & SUPPLIES INC
Contact:Sales Department
Phone:+1 701-213-4058
Fargo, North Dakota, USA 58103
General
Year
2023
Manufacturer
FINLAY
Model
I-120RS
Serial Number
TRX120RSCOMNC0465
Condition
New
Stock Number
E00064054
Description
FINLAY I-120RS TRACKED IMPACTOR PLANT EQUIPPED AS PER BELOW:
ENGINE:
- TIER 4 FINAL/STAGE IV: SCANIA DC9 257 KW (350 HP) ENGINE
IMPACT CHAMBER:
- TEREX CR028 IMPACT CHAMBER
- FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
- MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
- 4 BAR ROTOR - MARTENSITIC CERAMIC BLOW BARS 2 HIGH AND 2 LOW
- DIRECT DRIVE VIA CLUTCH
- DRIVE BELT TENSIONER WHEEL
- BLOW BAR LIFTING TOOL SUPPLIED
- DRIVE PULLEY TO SUIT HIGHER SPEED RANGE
- SMALLER ENGINE CHAMBER DRIVE PULLEY FITTED TO GIVE LOWER SPEED RANGE. STANDARD
LARGE PULLEY STILL DISPATCHED WITH THE MACHINE
HOPPER & FEEDER:
- VGF FIXED HOPPER
- STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN, STANDARD 50MM SPACING
- MESH APERTURE ON GRIZZLY FEEDER: 38MM
- SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
- BLANKING MAT FOR VGF
INDEPENDENT PRE-SCREEN:
- INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
BLANKING MATT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD - MESH APERTURES
AVAILABLE UPON REQUEST
- INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
- PRE-SCREEN PUNCH PLATE OPTIONAL SPACING 63MM
MAIN CONVEYOR:
- 1100MM (43.3") BELT FULL LENGTH
- UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STAINLESS STEEL LINERS (C/W SHORTENED MAIN CONVEYOR)
AUXILIARY:
- HYDRAULIC RAISE/LOWER FOR MAGNET
CONVEYORS:
- PIPED FOR OVER BAND MAGNET
- BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT, DISCHARGING TO THE RHS OF THE
MACHINE
- TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
DISCHARGE CHUTE, DISCHARGING TO RHS OF THE MACHINE
RS COMPONENTS:
- 3.663 X 1.52M (5' X 12" 2-DECK SCREEN)- CLOTH NOT INCLUDED
- 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
DECKS
- 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
FOR STOCKPILING OVERSIZE MATERIAL
- 1400MM (55") WIDE BELT FINES CONVEYOR
- RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY
- BELT WEIGHER BELT SCALE INSTALLED
- ADDITIONAL TRANSFER & STOCKPILE CONVEYOR FOR COLLECTING MATERIAL FROM EACH
INDIVIDUAL DECK OF SCREEN BOX, GIVING MIDDLE GRADE PRODUCT
CLIMATE SPEC:
- STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEG. C)
DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- T-LINK TELEMETRY SYSTEM FITTED C/W 7 YEAR DATA SUBSCRIPTION
- RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
MOVEMENT
- PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
GUARDING:
- GUARDING: FOR DRIVE AND TAIL PULLEYS, GUARDS MAY NOT MEET ALL LOCAL CODES;
CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED.