INR ₹ 1,03,51,437.16
Seller Information
View Seller InformationGeneral
Category
Trencher
Manufacturer
KEMROC
Model
EK110
Condition
New
Description
• Powerful enough to demolish granite up to 17,500 PSI
• Work alongside existing structures without flying debris
• Less than HALF the noise of a hydraulic hammer
• Vibration free - easier on the environment and the excavator!
• Precise trenching and tunneling
• Produces fine/ground material - backfilling is a breeze!
• Underwater capable - without modifications or additions!
Ideal for cutting stone with an uniaxial compressive strength up to 20,000 psi (140 MPa). They are efficient, vibration-free attachments for the excavation of deep narrow trenches with the optimal trench profile. Trench width starts from 15 inches. Another application is mining of medium hard minerals with compressive strength from 2,200 to 12,000 psi (15 to 80 MPa), where drill and blast is not possible.
KEMROC chain cutters excavate trenches no wider than absolutely necessary. The continuous chain, driven by the cutter drums, removes the material automatically from the space between the cutter drums. With standard drum cutters, the need to remove this material on technical grounds always results in trenches wider than the cutter. Keeping trenches to the minimum width possible saves unnecessary transport costs for removal of cut material and fill material becomes cheaper. The material produced by the chain cutter is fine grained and is ideal for use as fill. EK chain cutters reduce wear and tear on the excavator swing gear. In addition, they give a 40 percent energy saving for equivalent production rates compared to conventional rotary drum cutters without the central chain.
55,500 - 70,000 lbs recommended excavator weight
147 hp rated power
78 in drum cutter length
24/28/32 in cutting width
32 in cutter drum diameter
22 in gearbox width
65 rpm
56-69 gal/min recommended oil flow (80 gal/min max)
5,800 psi max operating hydraulic pressure
Hydraulic cutter, Trencher, Trench cutter, Trenchcutter, Drum cutter, Drumcutter, Revolving drum cutter, Revolving drumcutter, Transverse drum cutter, Transverse drumcutter, Chain cutter, Chaincutter, Rockwheel, Rock wheel, Rock cutter, Rockcutter, Axial drum cutters, Rotary drum cutters, Rotary drumcutters, Rock drum cutting machine, Rock drumcutting machine, tunneler
Uses:
Trenching
Undergound utility
Excavation
Demolition
Tunneling
Rockbreaking
Cement demolition
Concrete demolition
Bridge deck demolition
Rock removal
Foundation digging
Mining
Quarry
Fits to: Case, Caterpillar, CAT, Deere, Doosan, Hitachi, Hyundai, JCB, Kobelco, Komatsu, Link-belt.
Fits To
- CASE
- CATERPILLAR
- DEERE
- DOOSAN
- HITACHI
- HYUNDAI
- JCB
- KOBELCO
- KOMATSU
- LINK-BELT