INR ₹ 75,94,776
Seller Information
View Seller InformationEarthWORKS Machinery, Inc.
Contact:Jeff Marsalla
Phone:+1 916-512-2151
Olivehurst, California, USA 95961
General
Year
1995
Manufacturer
HARRIS
Model
HRB918
Condition
Used
Description
Location: Olivehurst, CA
Item #1 - Harris Industrial Horizontal Two Ram Baler Model HRB-918W, 42 Ton steel fabricated heavily reinforced mainframe, 12” diameter main cylinder, 8’ diameter bale ejector cylinder, 6” diameter bale release cylinder, bale separation door & release, 200 h.p. electric/hydraulic power package, 700 gallon hydraulic oil tank, 3 h.p. electric oil cooler, 15 h.p. strapper circulation pump motor, oil filtration system. Weather resistant steel enclosures with main disconnect, electric motor starters for all system motors including, Reduced Voltage Starter for the 200 h.p. motor, deck mounted electric/hydraulic operators control console with electronic display. Other features: 74” wide x 109” long feed hopper, 57” x 96” charge box opening, compression chamber: 40” x 29” x 60”, bale size: 45" x 31" x 64" (variable), bale volume: 40 cubic feet - 52 cf expanded (approximate), Cycle time: 100 to 150 seconds (depending on material type). Approximate capacity: Up to 19 tons per hour (bulk corrugated paper @ 25%) or Up to 45 tons per hour (solid waste @ 25%). Common materials: Bulk OCC, news print, PET/HDPE bottles, whole aluminum cans, solid waste, etc. Model: HRB918W-BR-BD-2; Serial Number: 2557; Date of Mfr. 1995.
*The included hydraulic bale release, hydraulic bale separation door, and 200 h.p. power package are all original factory provided upgrade options.
Item #2 - Krause 60” wide x 44’ long “slider belt” feeder/conveyor - 14’ horizontal loading section with 30’ long incline section to the baler hopper, 15 h.p. electric motor, shaft mounted gear reduction box, V-Belt drive with guard, 67” tall full length steel retaining walls on feeder incline section, 1” thick UHMW floor liner with ½” thick rubber belt bolted to steel slide bands, dual roller chain positive drive. Date of Mfr: 1998; S/N 98KRA00100.
Item #3 – ACCENT-LP Model 330 Bale Wire Tie System, upgraded with ACCENT module and electronic control panel, Model #331 (for 11-gauge wire), S/N 3660.
Used equipment.....Three Item Package Total $90,000.00
Condition: Well maintained and running when taken out of service. Feeder floor UHMW liner requires replacement at the feeder discharge end.
Transport information: Two truckloads required for all items. Baler load: 37’ long, 10’ 6” tall, 11’ 8” wide (with bale ejection cylinder removed), Weight: 83,500 lbs).
Feeder load: 47’ long, 8’ tall, 8’ 8 ½” wide, legal weight: 30,000 lbs (Estimate).