All(27)
BDT 47,08,914৳
Seller Information
View Seller InformationDeWitt Equipment
Contact:Matt DeWitt
Phone:+1 888-504-4589
Gilford, Ontario, Canada L0L 1R0
General
Year
2002
Manufacturer
CATERPILLAR
Model
D6M XL
Hours
10,800
Serial Number
3WN03302
Condition
Used
Hours Meter Inaccurate/Broken/Rolled Over
Accurate / Verified
Description
Work Ready D6M XL
UC replaced within 1000 hours - Sprockets, rails, pads, roller all >70% remaining
Service history upon request
Operator's station
Operator's station provides excellent viewing area to blade and rear of machine.
The Caterpillar Contour Series Seat
The Caterpillar Contour Series Seat is ergonomically designed and fully adjustable for maximum comfort.
Finger Tip Controls (FTC)
Finger Tip Controls (FTC) are clustered for easy, one-handed operation to the operator's left. They control steering, machine direction and gear selection.
Ground Clearance 1.4 ft (0 m)
Height - Top of Cab 10.2 ft (3 m)
Length of Track on Ground 8.4 ft (2 m)
Length w/ Blade 15.8 ft (5 m)
Length w/o Blade 12.3 ft (4 m)
Width Over Tracks 8.2 ft in (20 cm)
Engine
Aspiration Turbocharged
Displacement 402.8 cu in (0 m)
Engine Model 3116 T
Flywheel Power 140 hp (104 kw)
Gross Power 153 hp (114 kw)
Maximum Flywheel Power 153 hp (114 kw)
Net Power 140 hp (104 kw)
Number of Cylinders 6
Power Measured @ 2200 rpm
Hydraulic System
Pump Flow Capacity 31.5 gal/min (117 l/min)
Pump type Piston
Relief Valve Pressure 3600 psi
Operating Specifications
Alternator Supplied Amperage 70 A
Cooling System Fluid Capacity 12.8 gal (45 l)
Engine Oil Capacity 6.9 gal (23 l)
Final Drives Fluid Capacity 1.9 gal (4 l)
Fuel Capacity 82.2 gal (310 l)
Hydraulic Fluid Capacity 7.8 gal (27 l)
Operating Voltage 24 V V
Operating Weight 33200 lbs (15,059 kg)
Ripper
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 15.5 in (38 cm)
Maximum Penetration 18.7 in (46 cm)
Number of Pockets 3
Overall Beam Width 86.7 in (218 cm)
Ripper Type Parallelogram
Service Refill Capacities
Cooling System 12.7 gal (45 l)
Engine Crankcase 6.9 gal (23 l)
Final Drive - Each 1.9 gal (4 l)
Fuel Tank 82.2 gal (310 l)
Hydraulic Tank 7.7 gal (27 l)
Power Train 32.3 gal (121 l)
Standard Blade
Capacity 4.2 cu yds (3 m)
Height 47.1 in (119 cm)
Width 10.8 ft (3 m)
Transmission
1 Forward 2.2 mph (3 kph)
1 Reverse 2.7 mph (3 kph)
2 Forward 3.8 mph (5 kph)
2 Reverse 4.7 mph (6 kph)
3 Forward 6.4 mph (10 kph)
3 Reverse 8 mph (13 kph)
Max Speed - Forward 6.4 mph (10 kph)
Max Speed - Reverse 7.9 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Transmission Type Power Shift
Undercarriage
Ground Clearance 0.2 ft (0 m)
Ground Contact Area 4743 cu in (0 m)
Ground Pressure 7.3 psi
Number of Shoes per Side 40
Number of Track Rollers per Side 7
Standard Shoe Size 23.7 in (58 cm)
Track Gauge 6.2 ft (2 m)
Attachments
Blade Tilt
Yes
Blade Type
6-Way
Blade Type
Straight
Chassis
Undercarriage % Remaining
75
Track Type
Steel
Track % Remaining
80
Exterior
ROPS
Enclosed
Interior
Operator Controls
Joystick
A/C
Yes
A/C Condition
Fair
Heater
Yes
Seat Material
Cloth
Powertrain
Transmission Type
Powershift
Engine
Engine Manufacturer
CATERPILLAR