2022 ELLIOTT G85R

2022

ELLIOTT

3,596

G85R

008044

Accurate / Verified

Used

AP85-012

2022 Elliott Hi-Reach G85R mounted on 2022 International MV607 Chassis. 87' working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to truck frame, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Base mounted "MH" type hydraulically powered, individually controlled rear main outriggers and “A” secondary outriggers behind cab. High strength steel four section hydraulically telescoping boom with one double acting 7" lift cylinder plus (1) 2 1/2" piggyback and (1) 3" extension cylinder. Two cable carriers to boom tip with covers. Electronic self-leveling and rotating 40" x 60" EZR work platform with remote leveling from platform and aluminum floor. Power takeoff and pump drive, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, safety triangle kit, and two body harness and lanyards. LED lights to include all bed marker lights, stop, tail and turn. Installed on chassis, tested and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs. ➢ 16' Aluminum Bed with LED Lights and Grip Deck Coating (Sides unpainted) ➢ Standard Rear Bumper with Steps and Grab Handles ➢ Automatic Rotation Lockout - Prevents Boom from Rotating to Side Where "MH" Outriggers Are Not Fully Extended Horizontally. ("A" Outriggers Remain Fully Extended) ➢ 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook, Cable Packer, 180' of 3/8" Cable & Retainer Lug ➢ 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform. ➢ 110 Volt Line to Platform ➢ (2) Sign Forks on Platform ➢ Hot Shift PTO for Automatic Transmission ➢ 98" x 36" x 24" Aluminum Crossbody Box (Requires 2' Shorter Bed) (Treadplate-No paint) ➢ Cab Guard from Back of Cab to Front Bumper (Reg Cab) ➢ (4) 24" x 24" x 1" Composite Plastic Outrigger Pads With (2) Steel Holders ➢ Mounting Bracket Above 8' Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225) ➢ Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator ➢ Welder Leads to Platform - (2) 1 Gauge Cables ➢ Hi-Reach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD) ➢ 36" x 24" x 24" Aluminum Underbody Toolboxes ➢ Factory Supplied Chassis ➢ 300 hp Cummins B6.7 diesel engine (660 lb./ft) ➢ 224” WB, 157” C.A ➢ Allison 3500RDS_P 6-speed automatic transmission ➢ 33,000 GVWR, 13,000 lbs. front axle, 20,000 lb. rear axle ➢ 11R22.5 rear tires ➢ Aluminum wheels ➢ 2 front tow hooks ➢ Air brakes ABS ➢ Block heater ➢ 50-gallon aluminum fuel tank ➢ Power windows/locks ➢ Cruise control ➢ Bluetooth radio ➢ Air conditioning ➢ Air ride driver seat/two-man bench ➢ Disc wheels ➢ Color: White

25.91 m

Yes

1

Yes

4

Yes

Excellent

Yes

2022

INTERNATIONAL

MV

3HAEUMMNXNL536662

54,048 km

Cummins

223.71 kW

Diesel

2WD

Automatic

6

Single

14,968.55 kg

5,896.7 kg

9,071.85 kg