Call for price
Rental Prices:
Call For Availability
Machine Location:naRed Bluff, California, USA 95833(Opens in a new tab)
Seller Information
Rental Contact Information
General
Manufacturer
ROCK SYSTEMS
Model
802-RSI1
Condition
New
Description
Rock Systems Portable Single Hopper Pugmill Plant.
Rock Systems Portable Single Hopper Pugmill Plant, Model 802-RSI1 complete as follows:
a. 7’-10” wide x 14’ long feed hopper with 12 cubic yard storage capacity constructed from 1/4” thick steel plate with reinforcing at the hopper top and mid-section; self-relieving tapered hopper bottom opening to minimize bridging; skirtboards with adjustable rubber flashing; adjustable discharge gate with crank handle to control material flow from hopper.
b. 36” wide x 32’ long pugmill feed conveyor with Weg 15 h.p. electric motor, Dodge TXT5 shaft mount speed reducer, v-belt drive and OSHA drive guard; Dodge rubber lagged head pulley; Dodge self-cleaning tail pulley; screw take-up assemblies; Dodge pillow block bearings; OSHA tail terminal guard; head pulley nip guards; CEMA “C” 20 degree troughing idlers with 5” diameter rolls; CEMA “C” return idlers with 5” diameter rolls; 3 ply conveyor belting with 3/16” x 1/16” rubber covers; Flexco 140 mechanical belt splice; Flexco Rockline belt scraper installed.
c. Belt-Way model 100 belt scale with micro-computer mounted in a NEMA 4X waterproof enclosure displaying feed rate, total weight and belt speed; dual strain-gage load cell mounted in weighbridge; digital belt speed sensor; I/O board and calibration weights.
d. Eagle Iron Works 36” diameter x 8’-6” long pugmill with 75 h.p. electric motor; shaft mount speed reducer; v-belt drive and drive guard; Ni-Hard paddles; receiving hopper; hinged cover over mixing chamber; flow meter and spray bar.
e. Portable trailer constructed of heavy duty wide flange beams which are braced for optimum rigidity; wide flange vertical beams and angle cross members tie the hopper and trailer together; single axle chassis with dual 11 x 22.5 tires, air brakes, king pin, rear lighting, mud flaps and blocking pads; include walkway with handrails on one side of pugmill with access ladder.
f. Electric motor control panel with starters for all above electric motors and variable speed drive for the belt feeder pre-wired to each electric motor. Includes extra starters for one 10 h.p. off plant electric motor and one 5 h.p. off plant electric motor.
g. One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat safety yellow paint for all guarding.